/live/media/DE/DE_TA2119_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2119 Steering Tie Rod End - Left Outer
| Brand | Delphi TA2119 |
|---|---|
| Position | Left Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Cone Outside Diameter | 16.6 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Female |
| End 2 Thread Diameter | 0.551 |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 2.0 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 81.6 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 9.173 |
| Length Stud Center to End | 233.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Left Outer |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.906 |
| Tube Diameter | 23.0 |
| Type | Bent |
| Weight | 1.45 |
| Width | 68.0 |
| Fits | Volvo · 1 vehicle |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built for durability with corrosion resistance and a dust boot.
Pre-greased design. Includes mounting hardware for easier installation.
Cross-references Beck/Arnley 101-5041, Mevotech Supreme MDS1069 and 272416 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA2119 Front Left Outer Tie Rod End
Delphi TA2119 is a steering tie rod end for the front left outer position on the 1999 Volvo S80. It is built as a standard replacement part with OE-focused dimensional and material analysis for proper steering linkage fitment and consistent road feel.
Key Features
- Fits 1999 Volvo S80, left outer
- Part number TA2119
- Pre-greased design
- Dust boot included
- Coated steel housing and steel tie rod construction
- Bent tie rod end design
- Mounting hardware included
- Clockwise thread direction on both ends
- Female end 2 with 14.0 mm thread diameter
Detailed Description
Delphi TA2119 is engineered for steering systems that require a front left outer tie rod end with OE-style dimensional accuracy. Delphi subjects its steering components to extreme temperature and corrosion testing, including sub-zero and high-heat exposure plus extended salt spray testing, to verify durability in demanding conditions. For Volvo S80 steering repair work, TA2119 provides a direct replacement option that matches the original application requirements.
This part cross-references Beck/Arnley 101-5041 for the same application. Delphi TA2119 also cross-references Mevotech Supreme MDS1069 for the same application.
What It Helps Address
- Loose or imprecise steering response at the front left outer linkage
- Uneven tire wear caused by worn steering linkage components
- Clunking or play from a deteriorated tie rod end
- Steering pull related to worn outer steering hardware
- Restoration of correct toe control after front-end service
Installation Notes and Tips
Install Delphi TA2119 on the front left outer steering position only. Verify thread direction, thread diameter, and overall dimensions before installation, and perform a professional alignment after replacement. The pre-greased design and included dust boot support clean installation and long-term joint protection.
Quality Assurance
Delphi applies OE-level engineering practices to its aftermarket steering portfolio, with dimensional and material checks used to support fitment accuracy. TA2119 is tested for temperature extremes and corrosion resistance to help maintain performance in steering service on the 1999 Volvo S80.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1999 | Volvo | S80 | Left Outer | — |
| No rows match your filter. | ||||