/live/media/DE/DE_TA2240_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2240 Steering Tie Rod End - Right Outer
| Brand | Delphi TA2240 |
|---|---|
| Position | Right Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Female |
| End 1 Thread Diameter | 14.0 |
| End 1 Thread Direction | Clockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 10.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.25 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grade Type | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 66.0 |
| Housing Material | High Strength Steel |
| Item Grade | Standard Replacement |
| Length | 237.5 |
| Length Stud Center to End | 217.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Right Outer |
| Pre-Greased | No |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Bent |
| Weight | 1.42 |
| Width | 41.0 |
| Fits | Acura and Honda · 14 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the original part.
Coated finish. Helps resist harsh conditions, including extreme temperatures and salt spray.
Steel construction. High-strength steel housing with a dust boot and mounting hardware included.
Cross-references Beck/Arnley 101-4636, Mevotech Supreme MES3391R and MOOG Chassis Products ES3391R for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Steering Tie Rod End for Front Right Outer
Delphi TA2240 is a steering tie rod end built for the front right outer position on select Acura, Honda, and Isuzu applications. It combines OE-based dimensional and material analysis with a coated high-strength steel housing, dust boot protection, and standard replacement construction for direct steering service.
- Fits 1997-1999 Acura CL, right outer
- Fits 1996-1999 Isuzu Oasis, right outer
- Fits 1994-1997 Honda Accord, right outer
- Fits 1995-1997 Honda Odyssey, right outer
- Part number TA2240 for front right outer steering service
- High strength steel housing with coated finish
- Dust boot included for added joint protection
- Mounting hardware included
- Standard replacement tie rod end with threaded stud design
Built for Steering Precision
Delphi applies OE-focused engineering to its aftermarket steering portfolio, using dimensional and material analysis to match the original part as closely as possible. TA2240 features a bent design, clockwise thread direction on both ends, a 14.0 mm end 1 thread diameter, and a 10.0 mm end 2 thread diameter for the specified front right outer steering position. The steel tie rod construction, chloroprene rubber dust boot, and coated gray finish support long-term service in demanding road conditions. This part cross-references MOOG Chassis Products ES3391R and Mevotech Supreme MES3391R for the same application.
Common Steering Issues It Can Address
- Loose or vague steering feel at the front right outer linkage
- Clunking or knocking from worn steering joints
- Uneven tire wear caused by excessive steering play
- Steering wheel wander or poor directional stability
- Visible wear, torn boot, or corrosion at the tie rod end
Installation Notes and Tips
Verify the vehicle’s front right outer steering position before ordering, since this part is application-specific. After installation, a professional wheel alignment is recommended to restore correct toe settings and steering response. Confirm thread direction, thread pitch, and stud engagement during service on the 1994-1997 Honda Accord, 1995-1997 Honda Odyssey, 1996-1999 Isuzu Oasis, and 1997-1999 Acura CL.
Quality Assurance
Delphi subjects steering components to OE-level validation, including extreme temperature exposure below -40 degrees C and above 120 degrees C, plus 720 hours of salt spray testing. TA2240 is backed by Delphi’s OE expertise and material standards for aftermarket steering replacement.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1999 | Acura | CL | Right Outer | — |
| 1999 | Isuzu | Oasis | Right Outer | — |
| 1998 | Acura | CL | Right Outer | — |
| 1998 | Isuzu | Oasis | Right Outer | — |
| 1997 | Acura | CL | Right Outer | — |
| 1997 | Honda | Accord | Right Outer | — |
| 1997 | Honda | Odyssey | Right Outer | — |
| 1997 | Isuzu | Oasis | Right Outer | — |
| 1996 | Honda | Accord | Right Outer | — |
| 1996 | Honda | Odyssey | Right Outer | — |
| 1996 | Isuzu | Oasis | Right Outer | — |
| 1995 | Honda | Accord | Right Outer | — |
| 1995 | Honda | Odyssey | Right Outer | — |
| 1994 | Honda | Accord | Right Outer | — |
| No rows match your filter. | ||||