/live/media/DE/DE_TA2261_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2261 Steering Tie Rod End - Inner or Right Inner
| Brand | Delphi TA2261 |
|---|---|
| Position | Right Inner |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Black |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 22.0 |
| End 1 Thread Direction | Counterclockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.563 |
| End 2 Thread Direction | Clockwise |
| End 2 Threads Per Inch | 18 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grade Type | Standard |
| Grease Fitting Included | Yes |
| Greaseable | Yes |
| Height | 90.0 |
| Housing Material | High Strength Steel |
| Item Grade | Standard Replacement |
| Length | 704.0 |
| Length Stud Center to End | 682.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Inner, Right Inner. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Bent |
| Weight | 7.14 |
| Width | 44.0 |
| Fits | Ford · 11 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with high-strength steel for added durability and corrosion resistance.
Greaseable design. Pre-greased with a grease fitting and dust boot included.
Cross-references Mevotech Supreme MDS1041, MOOG Chassis Products DS1041 and D1041 for the same application. See all 9.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Steering Tie Rod End
Delphi TA2261 is a steering tie rod end built for OE-style replacement performance in the steering system. It is a direct-fit style component for the inner right side on select Ford Ranger and Ford Bronco II applications, with construction details focused on fit, corrosion resistance, and steering response.
- Fits 1984-1988 Ford Bronco II, right inner
- Fits 1983-1988 Ford Ranger, inner
- Pre-greased with grease fitting included for serviceability
- Dust boot included to help protect the joint from contamination
- High-strength steel housing with coated finish
- Non-adjustable bent design for standard replacement use
- Male threaded ends with threaded stud design
- Compatible with Delphi TA2261 replacement needs
Built for Steering Precision
This Delphi steering tie rod end uses a high-strength steel housing, steel tie rod material, and a chloroprene rubber dust boot to support durable steering linkage operation. Delphi applies OE-level dimensional and material analysis to help ensure proper match-up between the original part and the aftermarket replacement, and the part is tested across extreme temperature and salt-spray exposure conditions for durability in demanding environments. Delphi TA2261 is a practical choice for restoring steering feel on Ford Ranger and Ford Bronco II trucks with inner steering linkage wear.
This part cross-references MOOG Chassis Products DS1041 for the same application.
Common Problems It Can Help Solve
- Loose or wandering steering feel
- Clunking or play in the inner steering linkage
- Uneven tire wear caused by worn steering components
- Steering response that feels delayed or inconsistent
- Boot damage that exposes the joint to dirt and moisture
Installation Notes and Tips
Verify the vehicle position before installation, since this part is listed for inner and right inner applications depending on model. Confirm thread direction, thread diameter, and overall dimensions against the original component before service. After installation, a professional alignment is recommended to restore correct steering geometry and tire wear characteristics.
Quality Assurance
Delphi uses OE-focused engineering, dimensional analysis, and material validation for its steering portfolio. This part is tested for temperature extremes below -40 degrees C and above 120 degrees C, and it is exposed to 720 hours of salt spray to evaluate corrosion resistance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1988 | Ford | Bronco II | Right Inner | — |
| 1988 | Ford | Ranger | Inner | — |
| 1987 | Ford | Bronco II | Right Inner | — |
| 1987 | Ford | Ranger | Inner | — |
| 1986 | Ford | Bronco II | Right Inner | — |
| 1986 | Ford | Ranger | Inner | — |
| 1985 | Ford | Bronco II | Right Inner | — |
| 1985 | Ford | Ranger | Inner | — |
| 1984 | Ford | Bronco II | Right Inner | — |
| 1984 | Ford | Ranger | Inner | — |
| 1983 | Ford | Ranger | Inner | — |
| No rows match your filter. | ||||