/live/media/DE/DE_TA2297_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2297 Steering Tie Rod End - Left Outer
| Brand | Delphi TA2297 |
|---|---|
| Position | Left Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 18.0 |
| End 1 Thread Direction | Counterclockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grade Type | Standard |
| Grease Fitting Included | Yes |
| Greaseable | Yes |
| Height | 98.0 |
| Housing Material | High Strength Steel |
| Item Grade | Standard Replacement |
| Length | 187.0 |
| Length Stud Center to End | 165.0 |
| Mounting Hardware Included | Yes |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Straight |
| Weight | 1.1 |
| Width | 44.5 |
| Fits | Ford and Lincoln · 25 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the aftermarket part.
Coated finish. Helps resist corrosion through extreme temperature and salt-spray testing.
Greaseable design. Pre-greased with a grease fitting and dust boot included for easier service.
Cross-references Dorman - Premium T3366XL, Mevotech Supreme MES3366T and MOOG Chassis Products ES3366T for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA2297 Left Outer Tie Rod End
Delphi TA2297 is a steering tie rod end built for the left outer position on select Ford and Lincoln trucks and SUVs. It combines OE-based dimensional analysis with materials and sealing details that support precise steering response and consistent fitment.
Key Features
- Fits the left outer steering position
- Pre-greased with a grease fitting included
- Dust boot included for added joint protection
- High-strength steel housing with coated finish
- Straight, standard replacement design
- Threaded stud construction with male ends
- Mounting hardware included
- Greaseable service design
Fitment Details
- Fits 2004 Ford F-150 Heritage, left outer.
- Fits 1997-2003 Ford F-150, left outer.
- Fits 1997-2002 Ford Expedition, left outer.
- Fits 2002 Lincoln Blackwood, left outer.
- Fits 1998-2002 Lincoln Navigator, left outer.
- Fits 1998-1999 Ford F-250, left outer.
- Fits 1997 Ford F-250, left outer, under 8500lb GVW.
Detailed Description
Delphi TA2297 is a standard replacement tie rod end for steering systems that need accurate linkage geometry and dependable joint movement. It measures 187.0 mm in length, uses an 18.0 mm end 1 thread diameter with counterclockwise thread direction, and a 14.0 mm end 2 thread diameter with clockwise thread direction. The housing is high-strength steel, the tie rod material is steel, and the dust boot is made from chloroprene rubber for added sealing at the joint.
Delphi applies OE-focused testing and dimensional analysis to help maintain proper compatibility between the original part and the aftermarket replacement. This part cross-references MOOG Chassis Products ES3366T and Mevotech Supreme MES3366T for the same application. Delphi TA2297 is a direct-fit steering tie rod end choice for Ford F-150, Ford Expedition, and Lincoln Navigator front-end service where the left outer linkage is worn or loose.
Common Repair Uses
- Corrects steering play caused by a worn outer tie rod end
- Addresses looseness or clunking in the front steering linkage
- Helps restore proper toe alignment after front-end wear
- Replaces a damaged or corroded left outer steering joint
- Supports stable steering response on Ford and Lincoln applications
Installation Notes and Tips
Verify left outer position, thread direction, and thread diameters before installation. After replacement, perform a professional wheel alignment to restore steering geometry. Inspect the adjacent steering components, including the inner tie rod, idler, and ball joints, so the new Delphi TA2297 is not installed alongside other worn parts.
Quality Assurance
Delphi subjects its steering components to extreme temperature and salt-spray testing and uses OE-based material and dimensional analysis to support consistent aftermarket fit and performance. The Delphi TA2297 is built as a standard replacement part for the listed Ford and Lincoln applications.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2004 | Ford | F-150 Heritage | — | Left Outer | — |
| 2003 | Ford | F-150 | — | Left Outer | — |
| 2002 | Ford | Expedition | — | Left Outer | — |
| 2002 | Ford | F-150 | — | Left Outer | — |
| 2002 | Lincoln | Blackwood | — | Left Outer | — |
| 2002 | Lincoln | Navigator | — | Left Outer | — |
| 2001 | Ford | Expedition | — | Left Outer | — |
| 2001 | Ford | F-150 | — | Left Outer | — |
| 2001 | Lincoln | Navigator | — | Left Outer | — |
| 2000 | Ford | Expedition | — | Left Outer | — |
| 2000 | Ford | F-150 | — | Left Outer | — |
| 2000 | Lincoln | Navigator | — | Left Outer | — |
| 1999 | Ford | Expedition | — | Left Outer | — |
| 1999 | Ford | F-150 | — | Left Outer | — |
| 1999 | Ford | F-250 | RWD | Left Outer | — |
| 1999 | Ford | F-250 | 4WD | Left Outer | — |
| 1999 | Lincoln | Navigator | — | Left Outer | — |
| 1998 | Ford | Expedition | — | Left Outer | — |
| 1998 | Ford | F-150 | — | Left Outer | — |
| 1998 | Ford | F-250 | — | Left Outer | — |
| 1998 | Lincoln | Navigator | — | Left Outer | — |
| 1997 | Ford | Expedition | — | Left Outer | — |
| 1997 | Ford | F-150 | — | Left Outer | — |
| 1997 | Ford | F-250 | RWD | Left Outer | Under 8500lb GVW |
| 1997 | Ford | F-250 | 4WD | Left Outer | Under 8500lb GVW |
| No rows match your filter. | |||||