/live/media/DE/DE_TA2305_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2305 Steering Tie Rod End - Outer
| Brand | Delphi TA2305 |
|---|---|
| Position | Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Cone Outside Diameter | 16.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Female |
| End 2 Thread Diameter | 0.551 |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Height | 104.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 4.961 |
| Length Stud Center to End | 126.0 |
| Mounting Hardware Included | Yes |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.866 |
| Tube Diameter | 22.0 |
| Type | Straight |
| Weight | 1.36 |
| Width | 39.5 |
| Fits | Chevrolet, Pontiac, and Oldsmobile · 42 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built for durability with a corrosion-resistant finish.
Pre-greased design. Includes a dust boot and mounting hardware for easier service.
Cross-references Dorman - Premium TO92215XL, Mevotech Supreme MES3453 and MOOG Chassis Products ES3453 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Outer Tie Rod End for Steering Repair
Delphi TA2305 is a standard replacement outer steering tie rod end built for precise steering response and dependable fitment. It is engineered for select Chevrolet Impala, Chevrolet Monte Carlo, Pontiac Grand Prix, Pontiac Montana, Pontiac Trans Sport, Oldsmobile Silhouette, and Impala Limited applications.
With a steel housing, pre-greased construction, and a dust boot included, this Delphi tie rod end is built for everyday steering service on vehicles that need a direct outer tie rod replacement. Delphi applies OE-level dimensional and material analysis to help maintain proper compatibility with the original steering setup.
Key Features
- Part number: TA2305
- Outer steering tie rod end
- Straight, non-adjustable design
- Pre-greased for service-ready installation
- Dust boot included to help protect the joint
- Steel tie rod and steel housing construction
- Coated finish for added surface protection
- Female end 2 with clockwise thread direction
- Mounting hardware included
- Standard replacement item grade
Detailed Description
Delphi TA2305 is an outer tie rod end designed for steering systems that require a direct replacement at the wheel-end connection. It features a threaded stud design, chloroprene rubber dust boot, plastic bearing material, and a coated steel body for durable service in demanding road conditions. Delphi subjects its steering components to extreme temperature and salt-spray testing, along with dimensional and material analysis, to support OE-style fit and function.
This part cross-references MOOG Chassis Products ES3453 and Mevotech Supreme MES3453 for the same application. It is a strong match for drivers searching for a Chevrolet Impala outer tie rod end, Chevrolet Monte Carlo steering tie rod end, or Pontiac Grand Prix outer tie rod replacement. TA2305 is also listed for Impala Limited and other GM passenger vehicles with the same outer steering configuration.
Common Steering Issues This Part May Address
- Loose or vague steering feel
- Front-end play caused by a worn outer tie rod end
- Uneven tire wear from steering linkage wear
- Clunking or knocking from the steering connection
- Failed dust boot protection at the tie rod joint
Installation Notes and Tips
Verify the vehicle’s outer tie rod end position, thread direction, and end dimensions before installation. This part is listed for outer steering applications and uses clockwise thread direction at both ends. After replacement, a professional wheel alignment is recommended to restore proper steering geometry and tire wear characteristics.
Compatible With 2004-2013 Chevrolet Impala, outer; 2014-2016 Chevrolet Impala Limited, outer; 2004-2007 Chevrolet Monte Carlo, outer; 1997-2003 Pontiac Grand Prix, outer; 1999-2005 Pontiac Montana, outer; 1997-2004 Oldsmobile Silhouette, outer; and 1997-1999 Pontiac Trans Sport, outer.
Quality Assurance
Delphi applies OE-focused engineering and extreme-condition testing to its steering portfolio, including temperature exposure below -40 degrees C and above 120 degrees C, plus 720 hours of salt-spray testing. TA2305 is built to support consistent steering performance and fitment accuracy for the listed applications.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2016 | Chevrolet | Impala Limited | — | Outer | 4.9in from Stud Center to Body End |
| 2015 | Chevrolet | Impala Limited | — | Outer | 4.9in from Stud Center to Body End |
| 2014 | Chevrolet | Impala Limited | — | Outer | 4.9in from Stud Center to Body End |
| 2013 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2012 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2011 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2010 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2009 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2008 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2007 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2007 | Chevrolet | Monte Carlo | — | Outer | — |
| 2006 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2006 | Chevrolet | Monte Carlo | — | Outer | — |
| 2005 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2005 | Chevrolet | Monte Carlo | — | Outer | 4.9in from Stud Center to Body End |
| 2005 | Pontiac | Montana | Base | Outer | — |
| 2004 | Chevrolet | Impala | — | Outer | 4.9in from Stud Center to Body End |
| 2004 | Chevrolet | Monte Carlo | — | Outer | 4.9in from Stud Center to Body End |
| 2004 | Oldsmobile | Silhouette | — | Outer | — |
| 2004 | Pontiac | Montana | — | Outer | — |
| 2003 | Oldsmobile | Silhouette | — | Outer | — |
| 2003 | Pontiac | Grand Prix | — | Outer | — |
| 2003 | Pontiac | Montana | — | Outer | — |
| 2002 | Oldsmobile | Silhouette | — | Outer | — |
| 2002 | Pontiac | Grand Prix | — | Outer | — |
| 2002 | Pontiac | Montana | — | Outer | — |
| 2001 | Oldsmobile | Silhouette | — | Outer | — |
| 2001 | Pontiac | Grand Prix | — | Outer | — |
| 2001 | Pontiac | Montana | — | Outer | — |
| 2000 | Oldsmobile | Silhouette | — | Outer | — |
| 2000 | Pontiac | Grand Prix | — | Outer | — |
| 2000 | Pontiac | Montana | — | Outer | — |
| 1999 | Oldsmobile | Silhouette | — | Outer | — |
| 1999 | Pontiac | Grand Prix | — | Outer | — |
| 1999 | Pontiac | Montana | — | Outer | — |
| 1999 | Pontiac | Trans Sport | — | Outer | — |
| 1998 | Oldsmobile | Silhouette | — | Outer | — |
| 1998 | Pontiac | Grand Prix | — | Outer | — |
| 1998 | Pontiac | Trans Sport | — | Outer | — |
| 1997 | Oldsmobile | Silhouette | — | Outer | — |
| 1997 | Pontiac | Grand Prix | — | Outer | — |
| 1997 | Pontiac | Trans Sport | — | Outer | — |
| No rows match your filter. | |||||