/live/media/DE/DE_TA2450_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2450 Steering Tie Rod End - Left, Left Outer or Right Outer
| Brand | Delphi TA2450 |
|---|---|
| Position | Left |
| Adjustable | Yes |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Cone Outside Diameter | 14.45 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Female |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.394 |
| End 2 Thread Diameter | 10.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.25 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 75.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 7.756 |
| Length Stud Center to End | 197.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Left, Left Outer, Right Outer. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Bent |
| Weight | 1.42 |
| Width | 42.0 |
| Fits | Nissan · 12 vehicles |
OE expertise. Delphi applies OE engineering to its aftermarket steering parts.
Standard replacement. Built as a direct-fit steering tie rod end for straightforward installation.
Coated steel construction. Helps resist wear while the pre-greased design reduces initial friction.
Cross-references Beck/Arnley 101-5768, Mevotech Supreme MS30680 and MOOG Chassis Products ES800249 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA2450 Steering Tie Rod End
The Delphi TA2450 is a standard replacement steering tie rod end built for front-end steering precision and OE-style fit. It features a coated steel housing, pre-greased construction, and a dust boot to help protect the joint in demanding road conditions.
Key Features
- Delphi steering tie rod end, part number TA2450
- Fits front left, left outer, and right outer positions depending on vehicle application
- Pre-greased with no grease fitting for low-maintenance service
- Coated steel housing with steel tie rod material
- Dust boot included to help shield the joint from contamination
- Adjustable design with threaded stud construction
- Mounting hardware included
- Black finish with standard replacement grade
Detailed Description
Delphi TA2450 is engineered as a standard replacement steering tie rod end for vehicles that require accurate steering linkage geometry and dependable road feel. Delphi applies OE-level dimensional and material analysis to support proper compatibility, and the part is tested for harsh temperature extremes and extended salt-spray exposure. This tie rod end is a direct service option for 2009-2014 Nissan Cube, left outer, and 2007-2012 Nissan Versa, right outer. The Delphi TA2450 also cross-references Beck/Arnley 101-5768 for the same application.
What This Part Helps Address
- Loose or imprecise steering response
- Clunking or play in the front steering linkage
- Uneven tire wear caused by worn steering components
- Steering pull related to worn outer tie rod joints
- Restoring correct toe adjustment after tie rod wear
Installation Notes and Tips
Verify the exact position before ordering, since this part is listed for front left, left outer, and right outer applications depending on vehicle configuration. Confirm thread direction, thread diameter, and stud dimensions against the original part before installation. After replacement, perform a professional wheel alignment to restore steering geometry and tire wear characteristics. For fitment-specific service, use the application tab for the exact Nissan Cube or Nissan Versa position.
Quality Assurance
Delphi subjects steering components to extreme temperature testing and prolonged corrosion exposure to support OE-style durability. The brand’s OE background and dimensional analysis help maintain proper fit and function across the listed applications, including 2009-2014 Nissan Cube and 2007-2012 Nissan Versa.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2014 | Nissan | Cube | Left Outer | — |
| 2013 | Nissan | Cube | Left Outer | — |
| 2012 | Nissan | Cube | Left Outer | — |
| 2012 | Nissan | Versa | Right Outer | — |
| 2011 | Nissan | Cube | Left Outer | — |
| 2011 | Nissan | Versa | Right Outer | — |
| 2010 | Nissan | Cube | Left Outer | — |
| 2010 | Nissan | Versa | Right Outer | — |
| 2009 | Nissan | Cube | Left Outer | — |
| 2009 | Nissan | Versa | Right Outer | — |
| 2008 | Nissan | Versa | Right Outer | — |
| 2007 | Nissan | Versa | Right Outer | — |
| No rows match your filter. | ||||