/live/media/DE/DE_TA2451_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2451 Steering Tie Rod End - Left Outer, Right or Right Outer
| Brand | Delphi TA2451 |
|---|---|
| Position | Right |
| Adjustable | Yes |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Cone Outside Diameter | 14.45 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Female |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.394 |
| End 2 Thread Diameter | 10.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.25 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 75.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 7.756 |
| Length Stud Center to End | 197.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Right, Left Outer, Right Outer. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Bent |
| Weight | 1.42 |
| Width | 42.0 |
| Fits | Nissan · 12 vehicles |
OE expertise. Delphi applies OE engineering to its aftermarket steering portfolio.
Coated steel construction. Built with a steel housing and tie rod for added durability.
Pre-greased design. Includes a dust boot and mounting hardware for easier service.
Cross-references Beck/Arnley 101-5769, Mevotech Supreme MS30679 and MOOG Chassis Products ES800248 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA2451 Steering Tie Rod End
Delphi TA2451 is a front steering tie rod end built for OE-style replacement on select Nissan applications. It is engineered for the right outer position on 2009-2014 Nissan Cube and the left outer position on 2007-2012 Nissan Versa, with direct-fit dimensions and a pre-greased, sealed design.
Key Features
- OE-focused steering tie rod end for front suspension service
- Fits 2009-2014 Nissan Cube, right outer
- Fits 2007-2012 Nissan Versa, left outer
- Adjustable bent design for steering linkage alignment
- Pre-greased with dust boot included
- Steel housing and steel tie rod construction with coated finish
- Mounting hardware included
- Clockwise thread direction on both ends
Detailed Description
The Delphi TA2451 steering tie rod end is built to match OE dimensions and material requirements for consistent steering response and fitment. Delphi applies dimensional and material analysis to help ensure compatibility between the original part and the aftermarket replacement, while testing components across extreme temperatures and salt-spray exposure to evaluate durability in demanding road conditions. This part cross-references MOOG Chassis Products ES800248 for the same application.
What This Part Helps Address
- Loose or imprecise steering feel at the front wheels
- Clunking or play from a worn outer tie rod end
- Uneven tire wear caused by steering linkage wear
- Steering pull or alignment instability after suspension service
- Corrosion-related wear in exposed steering components
Installation Notes and Tips
Install this tie rod end in the specified position for your vehicle: 2009-2014 Nissan Cube, right outer, or 2007-2012 Nissan Versa, left outer. Verify thread size, thread direction, and overall length before installation, then perform a professional wheel alignment after replacement. Because this part is pre-greased and sealed, routine service does not require a grease fitting.
Quality Assurance
Delphi uses OE safety and engineering expertise in its aftermarket steering portfolio. TA2451 is tested for temperature extremes below -40 degrees C and above 120 degrees C, and it is exposed to 720 hours of salt spray to evaluate corrosion resistance and long-term performance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2014 | Nissan | Cube | Right Outer | — |
| 2013 | Nissan | Cube | Right Outer | — |
| 2012 | Nissan | Cube | Right Outer | — |
| 2012 | Nissan | Versa | Left Outer | — |
| 2011 | Nissan | Cube | Right Outer | — |
| 2011 | Nissan | Versa | Left Outer | — |
| 2010 | Nissan | Cube | Right Outer | — |
| 2010 | Nissan | Versa | Left Outer | — |
| 2009 | Nissan | Cube | Right Outer | — |
| 2009 | Nissan | Versa | Left Outer | — |
| 2008 | Nissan | Versa | Left Outer | — |
| 2007 | Nissan | Versa | Left Outer | — |
| No rows match your filter. | ||||