/live/media/DE/DE_TA2512_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2512 Steering Tie Rod End - Inner or Rear Inner
| Brand | Delphi TA2512 |
|---|---|
| Position | Rear Inner |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Black |
| Dust Boot Included | No |
| End 1 Gender | Male |
| End 1 Thread Direction | Clockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Direction | Clockwise |
| Friction Material Thickness | Coated |
| Grade | Regular |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 37.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 10.717 |
| Length Stud Center to End | 272.2 |
| Mounting Hardware Included | Yes |
| Position(s) | Inner, Rear Inner. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | No |
| Tie Rod Material | Steel |
| Tube Diameter | 14.5 |
| Type | Straight |
| Width | 37.0 |
| Fits | INFINITI and Nissan · 26 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a steel housing and tie rod for added durability.
Straight tie rod end. Includes mounting hardware for a simpler installation.
Cross-references Beck/Arnley 101-4087, Mevotech Supreme MEV181 and 48521-35A00 for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA2512 Steering Tie Rod End
Delphi TA2512 is a standard replacement steering tie rod end built for rear inner and inner steering applications on select Nissan and Infiniti vehicles. It combines a steel housing, steel tie rod construction, and coated finish with OE-focused dimensional and material analysis for accurate fitment.
Key Features
- Part number TA2512
- Steering tie rod end for inner and rear inner positions
- Straight design with male/male ends
- Steel housing and steel tie rod material
- Coated finish with black color
- Mounting hardware included
- Standard replacement grade
- Clockwise thread direction on both ends
Detailed Description
Delphi applies OE engineering methods to its aftermarket steering portfolio, using dimensional and material analysis to match the original part as closely as possible. TA2512 is a straight steering tie rod end with a 14.5 mm tube diameter, 1.5 thread pitch on end 1, and a stud-center-to-end length of 272.2 mm (10.717 in). It is not adjustable, not greaseable, and does not include a dust boot or grease fitting. This part cross-references Beck/Arnley 101-4087 for the same application.
Compatible With select Infiniti J30 and Q45 rear inner steering applications, as well as Nissan 240SX, 300ZX, Sentra, and Pulsar NX inner steering positions. If you are replacing worn steering linkage on a Nissan Sentra, Nissan 300ZX, or Infiniti Q45, Delphi TA2512 provides a direct-fit replacement option for the listed positions.
Common Problems This Part Helps Address
- Excessive steering play from a worn inner tie rod end
- Clunking or looseness in the steering linkage
- Uneven tire wear caused by steering geometry wear
- Imprecise steering response during lane changes or turns
- Corrosion-related wear on original steering components
Installation Notes and Tips
Verify the vehicle position before ordering, since this part is listed for inner and rear inner applications only. Compare thread direction, length, and mounting style to the original component before installation. After replacement, perform a professional wheel alignment to restore steering geometry and tire wear characteristics.
Quality Assurance
Delphi tests steering components under extreme temperature and corrosion conditions, including sub-zero and high-heat exposure and extended salt-spray testing. The brand’s OE-based engineering approach supports consistent fit and material compatibility for the listed applications.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1997 | INFINITI | J30 | — | Rear Inner | — |
| 1996 | INFINITI | J30 | — | Rear Inner | — |
| 1996 | INFINITI | Q45 | — | Rear Inner | — |
| 1995 | INFINITI | J30 | — | Rear Inner | — |
| 1995 | INFINITI | Q45 | — | Rear Inner | — |
| 1994 | INFINITI | J30 | — | Rear Inner | — |
| 1994 | INFINITI | Q45 | — | Rear Inner | — |
| 1993 | INFINITI | J30 | — | Rear Inner | — |
| 1993 | INFINITI | Q45 | — | Rear Inner | — |
| 1993 | Nissan | 240SX | — | Rear Inner | — |
| 1993 | Nissan | 300ZX | — | Rear Inner | — |
| 1992 | INFINITI | Q45 | — | Rear Inner | — |
| 1992 | Nissan | 240SX | — | Rear Inner | — |
| 1992 | Nissan | 300ZX | — | Rear Inner | — |
| 1991 | INFINITI | Q45 | — | Rear Inner | — |
| 1991 | Nissan | 240SX | — | Rear Inner | — |
| 1991 | Nissan | 300ZX | — | Rear Inner | — |
| 1990 | INFINITI | Q45 | — | Rear Inner | — |
| 1990 | Nissan | 300ZX | — | Rear Inner | — |
| 1990 | Nissan | Sentra | FWD | Inner | — |
| 1989 | Nissan | Sentra | FWD | Inner | — |
| 1986 | Nissan | Pulsar NX | — | Inner | — |
| 1986 | Nissan | Sentra | — | Inner | — |
| 1985 | Nissan | Pulsar NX | — | Inner | — |
| 1985 | Nissan | Sentra | — | Inner | — |
| 1984 | Nissan | Sentra | — | Inner | — |
| No rows match your filter. | |||||