/live/media/DE/DE_TA2551_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2551 Steering Tie Rod End - Left Outer
| Brand | Delphi TA2551 |
|---|---|
| Position | Left Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 22.0 |
| End 1 Thread Direction | Counterclockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grade Type | Standard |
| Grease Fitting Included | Yes |
| Greaseable | Yes |
| Height | 101.0 |
| Housing Material | High Strength Steel |
| Item Grade | Standard Replacement |
| Length | 155.0 |
| Length Stud Center to End | 133.0 |
| Mounting Hardware Included | Yes |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Straight |
| Weight | 1.52 |
| Width | 44.0 |
| Fits | Ford · 11 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the aftermarket part.
Coated steel construction. High-strength steel with a coated finish resists harsh conditions.
Pre-greased. Includes a grease fitting, dust boot, and mounting hardware for easier service.
Cross-references Mevotech Supreme MES2728L, MOOG Chassis Products ES2728L and F2TZ 3A131-A for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA2551 Left Outer Tie Rod End
Delphi TA2551 is a steering tie rod end built for OE-style replacement on select Ford F-250 applications. It is a straight, left outer tie rod end with a pre-greased design, grease fitting, dust boot, and mounting hardware included for service-ready installation.
Key Features
- Part number: TA2551
- Position: Left outer
- Straight steering tie rod end design
- Pre-greased with grease fitting included
- Dust boot included for joint protection
- High-strength steel housing with coated finish
- Steel tie rod material with threaded stud type
- Standard replacement grade
- Non-adjustable construction
Detailed Description
Delphi applies OE engineering standards to its aftermarket steering portfolio, and the TA2551 reflects that approach with dimensional and material analysis focused on fit and function. This left outer tie rod end uses a high-strength steel housing, chloroprene rubber dust boot, and greaseable construction to support steering service on Ford F-250 trucks. It is listed for 1985-1994 Ford F-250, left outer, and 1995 Ford F-250, left outer, with handling package. The Delphi TA2551 is also a direct cross-reference for common replacement numbers used in the same application.
This part cross-references Mevotech Supreme MES2728L and MOOG Chassis Products ES2728L for the same application.
What It Helps Address
- Loose or worn steering response at the left front wheel
- Clunking or play from a worn outer tie rod joint
- Uneven toe settings caused by steering linkage wear
- Boot damage that can expose the joint to contamination
- Service needs on Ford F-250 steering linkage repairs
Installation Notes and Tips
Fits 1985-1994 Ford F-250, left outer. Fits 1995 Ford F-250, left outer, with Handling Package. Verify thread direction, thread diameter, and position before installation; TA2551 uses a counterclockwise thread on end 1 and a clockwise thread on end 2. After installation, perform a professional front-end alignment to restore steering geometry.
Quality Assurance
Delphi subjects steering components to temperature extremes below -40 degrees C and above 120 degrees C, along with extended salt-spray exposure, to evaluate durability and corrosion resistance. The brand’s OE-focused testing and dimensional analysis support consistent replacement fitment for Ford F-250 steering service.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1995 | Ford | F-250 | 4WD | Left Outer | with Handling Package |
| 1994 | Ford | F-250 | 4WD | Left Outer | — |
| 1993 | Ford | F-250 | 4WD | Left Outer | — |
| 1992 | Ford | F-250 | 4WD | Left Outer | — |
| 1991 | Ford | F-250 | 4WD | Left Outer | — |
| 1990 | Ford | F-250 | 4WD | Left Outer | — |
| 1989 | Ford | F-250 | 4WD | Left Outer | — |
| 1988 | Ford | F-250 | 4WD | Left Outer | — |
| 1987 | Ford | F-250 | 4WD | Left Outer | — |
| 1986 | Ford | F-250 | 4WD | Left Outer | — |
| 1985 | Ford | F-250 | 4WD | Left Outer | — |
| No rows match your filter. | |||||