/live/media/DE/DE_TA2803_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2803 Steering Tie Rod End - At Pitman Arm
| Brand | Delphi TA2803 |
|---|---|
| Position | At Pitman Arm |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 24.0 |
| End 1 Thread Direction | Counterclockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.5 |
| End 2 Thread Direction | Clockwise |
| End 2 Threads Per Inch | 20 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 73.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 162.0 |
| Length Stud Center to End | 240.0 |
| Mounting Hardware Included | Yes |
| Pre-Greased | No |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Bent |
| Weight | 2.52 |
| Width | 45.0 |
| Fits | Jeep · 6 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built for durability with a dust boot included.
Mounting hardware included. Ready for a straightforward steering tie rod end replacement.
Cross-references Mopar 52088511 for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA2803 Steering Tie Rod End
Delphi TA2803 is a steering tie rod end built for OE-style replacement performance in the steering linkage. It is engineered for 1999-2004 Jeep Grand Cherokee applications at the pitman arm, with dimensional and material checks focused on fit and steering response.
Key Features
- Fits 1999-2004 Jeep Grand Cherokee, at pitman arm
- OE-focused aftermarket steering component from Delphi
- Steel housing and steel tie rod construction
- Coated gray finish for added surface protection
- Dust boot included to help protect the joint area
- Mounting hardware included
- Standard replacement grade
- Part number TA2803
Detailed Description
This Delphi steering tie rod end is designed for direct replacement in the steering system of the Jeep Grand Cherokee. Delphi applies OE-level dimensional and material analysis to help ensure proper compatibility between the original part and the aftermarket replacement. The bent design, threaded stud configuration, and included dust boot support a precise steering connection at the pitman arm. Delphi TA2803 is also cross-referenced to Mopar 52088511 for the same application.
What It Helps Address
- Loose or worn steering linkage at the pitman arm
- Steering play caused by joint wear
- Uneven steering response from a deteriorated tie rod end
- Noise or movement from a damaged steering connection
- Replacement needs on 1999-2004 Jeep Grand Cherokee steering systems
Installation Notes and Tips
Verify the pitman arm position and thread specifications before installation. This part uses male threaded ends with opposite thread directions on each side, so matching the existing steering linkage layout is important. Inspect related steering components for wear during replacement and confirm alignment after installation on the Jeep Grand Cherokee.
Quality Assurance
Delphi subjects steering components to temperature extremes below -40 degrees C and above 120 degrees C, along with extended salt spray exposure, to evaluate durability and corrosion resistance. These validation steps support OE-style performance expectations for the TA2803 steering tie rod end.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Jeep | Grand Cherokee | At Pitman Arm | — |
| 2003 | Jeep | Grand Cherokee | At Pitman Arm | — |
| 2002 | Jeep | Grand Cherokee | At Pitman Arm | — |
| 2001 | Jeep | Grand Cherokee | At Pitman Arm | — |
| 2000 | Jeep | Grand Cherokee | At Pitman Arm | — |
| 1999 | Jeep | Grand Cherokee | At Pitman Arm | — |
| No rows match your filter. | ||||