/live/media/DE/DE_TA3006_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA3006 Steering Tie Rod End - Right Outer
| Brand | Delphi TA3006 |
|---|---|
| Position | Right Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Black |
| Cone Outside Diameter | 15.5 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Female |
| End 2 Thread Diameter | 0.551 |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 79.3 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 8.72 |
| Length Stud Center to End | 221.5 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Right Outer |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.807 |
| Tube Diameter | 20.5 |
| Type | Bent |
| Weight | 1.43 |
| Width | 56.5 |
| Fits | Mazda · 5 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a dust boot for added protection.
Pre-greased design. Includes mounting hardware for easier installation.
Cross-references Beck/Arnley 101-7393, Dorman - Premium TO65182PR and Mevotech Supreme MS76610 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA3006 Front Right Outer Tie Rod End
Delphi TA3006 is a steering tie rod end for the front right outer position on select Mazda 6 models. It is built as a standard replacement with a steel housing, coated finish, pre-greased construction, and a dust boot to help protect the joint in everyday driving conditions.
Key Features
- Fits 2009-2013 Mazda 6, right outer
- Front right outer steering tie rod end
- Pre-greased and non-greaseable design
- Steel housing with coated finish
- Dust boot included with chloroprene rubber material
- Mounting hardware included
- Bent style with threaded stud design
- Standard replacement part number TA3006
Detailed Description
Delphi TA3006 is engineered for steering linkage service where precise outer tie rod replacement is needed. It uses OE-focused dimensional and material analysis to support proper fit and function, and Delphi subjects its steering components to extreme temperature and salt-spray testing to verify durability in demanding conditions. This part cross-references MOOG Chassis Products ES800855 for the same application. For Mazda 6 steering repair, TA3006 provides a direct replacement option for the front right outer position.
Common Repair Symptoms
- Loose or wandering steering feel
- Uneven tire wear caused by worn steering linkage
- Clunking or play in the front suspension and steering system
- Steering wheel off-center after tie rod wear
- Front-end alignment issues related to outer tie rod wear
Installation Notes
Verify thread direction, stud dimensions, and position before installation. TA3006 is a bent, non-adjustable tie rod end with clockwise thread direction at both ends, so correct side and orientation matter during service. After installation on a 2009-2013 Mazda 6, front right outer position, perform a professional wheel alignment to restore steering geometry.
Quality Assurance
Delphi applies OE-based engineering and validation to its aftermarket steering portfolio. TA3006 is tested across extreme temperature ranges and extended salt-spray exposure to support corrosion resistance and long-term service performance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2013 | Mazda | 6 | Right Outer | — |
| 2012 | Mazda | 6 | Right Outer | — |
| 2011 | Mazda | 6 | Right Outer | — |
| 2010 | Mazda | 6 | Right Outer | — |
| 2009 | Mazda | 6 | Right Outer | — |
| No rows match your filter. | ||||