/live/media/DE/DE_TA3012_Ang.jpg)
Delphi TA3012 Steering Tie Rod End - Right Outer
| Brand | Delphi TA3012 |
|---|---|
| Position | Right Outer |
| Adjustable | Yes |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Cone Outside Diameter | 18.6 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Female |
| End 1 Thread Diameter | 0.551 |
| End 1 Thread Diameter | 14.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.472 |
| End 2 Thread Diameter | 12.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.25 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 90.5 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 5.354 |
| Length Stud Center to End | 136.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Right Outer, Left Outer. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Bent |
| Weight | 1.31 |
| Width | 44.0 |
| Fits | Nissan and INFINITI · 12 vehicles |
OE expertise. Delphi applies OE engineering to its aftermarket steering portfolio.
Standard replacement. Built for compatibility with OE and aftermarket dimensions and materials.
Coated steel construction. Steel housing and tie rod with a coated finish for added durability.
Cross-references Beck/Arnley 101-5995, Mevotech Supreme MES80578 and MOOG Chassis Products ES80578 for the same application. See all 10.
OE-Style Steering Tie Rod End
Delphi TA3012 is a standard replacement steering tie rod end built for front steering service on select Nissan 350Z and INFINITI G35 applications. It combines OE-based dimensional analysis with tested materials to support precise steering response and consistent fitment.
- Steering tie rod end for front right outer applications
- Fits 2003-2009 Nissan 350Z, right outer
- Fits 2003-2007 INFINITI G35, right outer
- Pre-greased design with dust boot included
- Adjustable bent-style construction
- Steel housing and steel tie rod material with coated finish
- Mounting hardware included
- Clockwise thread direction on both ends
- Standard replacement grade
Fitment and Application Details
Delphi TA3012 is engineered for the front right outer steering position and is also listed for left outer use where the vehicle application calls for it. For the confirmed fitment data provided, it fits 2003-2009 Nissan 350Z, right outer, and 2003-2007 INFINITI G35, right outer. This part cross-references MOOG Chassis Products ES80578 for the same application.
The part number TA3012 is backed by Delphi’s OE-focused steering portfolio, with compatibility checks based on dimensional and material analysis. That approach helps maintain proper thread engagement, stud geometry, and steering linkage alignment for the listed Nissan 350Z and INFINITI G35 applications.
Common Steering Issues This Part Can Address
- Loose or vague steering feel at the front wheels
- Clunking or knocking from worn outer tie rod joints
- Uneven tire wear caused by steering linkage play
- Steering wheel wander or poor directional stability
- Failed dust boot or contaminated tie rod joint
Installation Notes and Tips
Verify the vehicle position before ordering, since TA3012 is listed for the front right outer steering location. Confirm thread direction, thread diameter, and stud dimensions against the original part before installation. After replacement, perform a professional wheel alignment to restore steering geometry and tire wear characteristics.
Quality Assurance
Delphi subjects its steering components to extreme temperature and corrosion testing, including sub-zero and high-heat exposure plus extended salt-spray testing. That validation supports OE-level durability for the aftermarket steering application and helps the TA3012 meet the demands of daily driving.
| Year | Make | Model | Body Type | Drive Type | Position | Notes |
|---|---|---|---|---|---|---|
| 2009 | Nissan | 350Z | — | — | Right Outer | — |
| 2008 | Nissan | 350Z | — | — | Right Outer | — |
| 2007 | INFINITI | G35 | Coupe | — | Right Outer | — |
| 2007 | Nissan | 350Z | — | — | Right Outer | — |
| 2006 | INFINITI | G35 | — | RWD | Right Outer | — |
| 2006 | Nissan | 350Z | — | — | Right Outer | — |
| 2005 | INFINITI | G35 | — | RWD | Right Outer | — |
| 2005 | Nissan | 350Z | — | — | Right Outer | — |
| 2004 | INFINITI | G35 | — | RWD | Right Outer | — |
| 2004 | Nissan | 350Z | — | — | Right Outer | — |
| 2003 | INFINITI | G35 | — | — | Right Outer | — |
| 2003 | Nissan | 350Z | — | — | Right Outer | — |
| No rows match your filter. | ||||||