/live/media/DE/DE_TA3052_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA3052 Steering Tie Rod End - Outer
| Brand | Delphi 250-241071 |
|---|---|
| Position | Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Black |
| Cone Outside Diameter | 16.1 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Female |
| End 2 Thread Diameter | 0.551 |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 73.9 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 4.173 |
| Length Stud Center to End | 106.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Outer |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.827 |
| Tube Diameter | 21.0 |
| Type | Straight |
| Weight | 1.01 |
| Width | 40.0 |
| Fits | Honda · 6 vehicles |
Standard replacement. Built as an OE-compatibility aftermarket steering part.
Coated steel construction. Helps resist corrosion and wear in demanding conditions.
Pre-greased design. Includes a dust boot and mounting hardware for easier service.
Cross-references Beck/Arnley 101-6329, Mevotech Supreme MES3669 and MOOG Chassis Products ES3669 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Front Outer Tie Rod End
Delphi TA3052 is a standard replacement steering tie rod end for the front outer position on select Honda Odyssey models. It is built with OE-focused dimensional and material analysis to support proper steering geometry and consistent fitment on the vehicle.
- Fits 1999-2004 Honda Odyssey, outer
- Front outer steering tie rod end for OE-style replacement
- Pre-greased design with dust boot included
- Steel housing and steel tie rod construction
- Coated black finish for added corrosion resistance
- Clockwise thread direction at both ends
- Mounting hardware included
Product Details
The Delphi TA3052 steering tie rod end is engineered for the front outer steering linkage on 1999-2004 Honda Odyssey models. Delphi applies OE-level testing and material analysis to its aftermarket steering portfolio, including exposure to extreme temperatures and salt spray, to help maintain performance in demanding road conditions. This part cross-references MOOG Chassis Products ES3669 for the same application.
Common Steering Issues It Can Address
- Loose or vague steering response at the front end
- Clunking or knocking from worn steering linkage components
- Uneven tire wear caused by excessive toe movement
- Steering play from a worn outer tie rod end
- Front-end alignment instability after component wear
Installation Notes
Verify thread direction, thread diameter, and overall dimensions before installation. This Delphi tie rod end is non-adjustable, pre-greased, and includes a dust boot, so it is ready for steering linkage service once the old component is removed and alignment is checked. After installation on a Honda Odyssey front outer position, a professional wheel alignment is recommended.
Quality Assurance
Delphi uses OE-based testing and dimensional validation for its steering components, with parts evaluated for temperature extremes and salt-spray exposure to support durability in real-world driving. Part number TA3052 is built as a standard replacement steering component for the specified application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Honda | Odyssey | Outer | — |
| 2003 | Honda | Odyssey | Outer | — |
| 2002 | Honda | Odyssey | Outer | — |
| 2001 | Honda | Odyssey | Outer | — |
| 2000 | Honda | Odyssey | Outer | — |
| 1999 | Honda | Odyssey | Outer | — |
| No rows match your filter. | ||||