/live/media/DE/DE_TA3176_Ang.jpg)
Delphi TA3176 Steering Tie Rod End - Left Outer
| Brand | Delphi TA3176 |
|---|---|
| Position | Left Outer |
| Adjustable | Yes |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Cone Outside Diameter | 22.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Female |
| End 1 Thread Diameter | 0.63 |
| End 1 Thread Diameter | 16.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.551 |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grade Type | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 104.0 |
| Housing Material | High Strength Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 8.228 |
| Length Stud Center to End | 209.0 |
| Mounting Hardware Included | Yes |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Bent |
| Weight | 2.09 |
| Width | 55.0 |
| Fits | Audi · 15 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a high-strength steel housing for added durability.
Pre-greased design. Includes a dust boot and mounting hardware for easier service.
Cross-references Beck/Arnley 101-8097, Mevotech Supreme MS106108 and 4H0 422 817 A for the same application. See all 5.
OE-Style Steering Tie Rod End for Audi
Delphi TA3176 is a steering tie rod end built for the left outer position on select Audi A8 Quattro and S8 applications. It combines OE-focused dimensional control with a coated, high-strength steel design to support precise steering response and consistent fitment.
- Fits left outer steering position on select Audi A8 Quattro and S8 models
- Pre-greased design with dust boot included
- High-strength steel housing with coated finish
- Adjustable bent tie rod end design
- Threaded stud construction with mounting hardware included
- Delphi part number TA3176
Fitment Details
- Fits 2011-2018 Audi A8 Quattro, left outer.
- Fits 2018 Audi S8, left outer.
- Fits 2013-2014 Audi S8, left outer.
- Fits 2017 Audi S8, left outer, fits vehicles equipped with hydraulic steering.
- Fits 2015-2016 Audi S8, left outer, with Variable Assist Power Steering.
- Fits 2010 Audi A8 Quattro, left outer, from chassis # 4H-A-000 001 to chassis # 4H-A-010 000.
Product Description
Delphi TA3176 is engineered as a standard replacement steering tie rod end for the left outer side of the front steering linkage. It uses a steel tie rod body, high-strength steel housing, and a polyoxymethylene bearing material to help maintain steering precision and durability. The black coated finish, chloroprene rubber dust boot, and pre-greased construction support long-term service in demanding road conditions. Delphi applies OE dimensional and material analysis to help ensure proper compatibility with the original steering geometry on Audi A8 Quattro and Audi S8 vehicles.
This part cross-references Beck/Arnley 101-8097 and Mevotech Supreme MS106108 for the same application. Delphi TA3176 is a direct-fit steering component for drivers servicing worn outer tie rod ends on compatible Audi steering systems.
Common Replacement Reasons
- Loose or vague steering feel
- Front-end wandering or poor straight-line tracking
- Uneven tire wear caused by steering linkage wear
- Clunking or play at the left outer tie rod end
- Visible boot damage or contamination at the steering joint
Installation Notes
Verify left outer fitment by year, model, steering system, and chassis break points before installation. After replacement, perform a professional wheel alignment to restore steering geometry and tire wear characteristics. Inspect the adjacent steering linkage and related suspension components for wear while the vehicle is apart.
Quality Assurance
Delphi subjects its steering components to extreme temperature and corrosion testing, including exposure below -40 degrees C, above 120 degrees C, and extended salt-spray testing. That validation process supports OE-style performance and fit consistency for the TA3176 steering tie rod end.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2018 | Audi | A8 Quattro | Left Outer | — |
| 2018 | Audi | S8 | Left Outer | — |
| 2017 | Audi | A8 Quattro | Left Outer | — |
| 2017 | Audi | S8 | Left Outer | Fits vehicles equipped with hydraulic steering. |
| 2016 | Audi | A8 Quattro | Left Outer | — |
| 2016 | Audi | S8 | Left Outer | with Variable Assist Power Steering |
| 2015 | Audi | A8 Quattro | Left Outer | — |
| 2015 | Audi | S8 | Left Outer | with Variable Assist Power Steering |
| 2014 | Audi | A8 Quattro | Left Outer | — |
| 2014 | Audi | S8 | Left Outer | — |
| 2013 | Audi | A8 Quattro | Left Outer | — |
| 2013 | Audi | S8 | Left Outer | — |
| 2012 | Audi | A8 Quattro | Left Outer | — |
| 2011 | Audi | A8 Quattro | Left Outer | — |
| 2010 | Audi | A8 Quattro | Left Outer | From Chassis # 4H-A-000 001; To Chassis # 4H-A-010 000 |
| No rows match your filter. | ||||