/live/media/DE/DE_TA3204_Ang.jpg)
Delphi TA3204 Steering Tie Rod End - Inner
| Brand | Delphi TA3204 |
|---|---|
| Position | Inner |
| Adjustable | No |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Gray and Black |
| Dust Boot Included | No |
| End 1 Gender | Male |
| End 1 Thread Diameter | 16.0 |
| End 1 Thread Direction | Clockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 16.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| End 2 Threads Per Inch | 17 |
| Friction Material Thickness | Coated |
| Grade | Premium |
| Grade Type | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 36.0 |
| Housing Material | High Strength Steel |
| Item Grade | Standard Replacement |
| Length | 235.0 |
| Length Stud Center to End | 7.665 |
| Length Stud Center to End | 194.7 |
| Position(s) | Front Inner, Inner. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Straight |
| Weight | 1.24 |
| Width | 36.0 |
| Fits | Hyundai and Kia · 13 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the aftermarket part.
Coated finish. Helps resist corrosion through extreme temperature and salt-spray testing.
High-strength steel. Built with a steel tie rod and POM bearing material for dependable steering performance.
Cross-references Beck/Arnley 101-7377, Beck/Arnley 101-7794 and Mevotech Supreme MS90727 for the same application. See all 7.
Delphi TA3204 Steering Tie Rod End
Delphi TA3204 is a straight steering tie rod end built for front inner steering applications. It uses a high-strength steel housing, steel tie rod material, and a pre-greased design to support consistent steering response in service.
Compatible with Hyundai Accent and Kia Rio front inner steering applications, this Delphi tie rod end is engineered with OE-focused dimensional and material analysis for proper fit and function. The TA3204 part number is a direct reference for shoppers replacing worn inner steering components on select Hyundai Accent and Kia Rio models.
Key Features
- Part number: TA3204
- Steering tie rod end for front inner, inner position
- Straight design with male/male ends
- High-strength steel housing with steel tie rod material
- Pre-greased for service-ready installation
- Coated finish for added surface protection
- Standard replacement, premium grade
- Thread size: 16.0 mm on both ends with 1.5 pitch
- Thread direction: clockwise on both ends
- Bearing material: Polyoxymethylene (POM)
Detailed Description
Delphi TA3204 steering tie rod end is built for front inner steering service on select Hyundai Accent and Kia Rio vehicles. It measures 235.0 in length, with a 194.7 stud-center-to-end length, and uses a threaded stud design for secure steering linkage connection. The coated gray and black finish, high-strength steel housing, and pre-greased construction support dependable replacement performance in everyday driving conditions.
Delphi applies OE-level dimensional and material analysis to its aftermarket steering portfolio, helping maintain proper part compatibility with the original steering geometry. This part cross-references MOOG Chassis Products EV800902 for the same application.
What This Part Helps Address
- Loose or imprecise steering feel from a worn inner tie rod end
- Excessive play in the front steering linkage
- Uneven tire wear caused by steering component wear
- Clunking or knocking from the inner steering area
- Steering response issues on Hyundai Accent and Kia Rio front inner applications
Installation Notes and Tips
Install on the front inner steering position only. Verify thread direction, thread diameter, and overall length against the removed part before installation. Because this tie rod end is not adjustable and does not include a grease fitting or dust boot, confirm the surrounding steering components are in serviceable condition before reassembly. After installation, perform a professional wheel alignment.
Fits 2011 Hyundai Accent, inner from 04/06/2011. Fits 2012-2017 Hyundai Accent, inner. Fits 2012-2016 Kia Rio, inner. Fits 2017 Kia Rio, inner to 03/31/2017.
Quality Assurance
Delphi subjects steering components to extreme temperature and salt-spray testing and uses OE-focused engineering checks to support consistent aftermarket fit and performance. The TA3204 is a premium-grade standard replacement part built with materials selected for steering durability.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2017 | Hyundai | Accent | Inner | — |
| 2017 | Kia | Rio | Inner | To 03/31/2017 |
| 2016 | Hyundai | Accent | Inner | — |
| 2016 | Kia | Rio | Inner | — |
| 2015 | Hyundai | Accent | Inner | — |
| 2015 | Kia | Rio | Inner | — |
| 2014 | Hyundai | Accent | Inner | — |
| 2014 | Kia | Rio | Inner | — |
| 2013 | Hyundai | Accent | Inner | — |
| 2013 | Kia | Rio | Inner | — |
| 2012 | Hyundai | Accent | Inner | — |
| 2012 | Kia | Rio | Inner | — |
| 2011 | Hyundai | Accent | Inner | From 04/06/2011 |
| No rows match your filter. | ||||