/live/media/DE/DE_TA5092_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA5092 Steering Tie Rod End - Inner
| Brand | Delphi TA5092 |
|---|---|
| Position | Inner |
| Adjustable | No |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Cone Outside Diameter | 0.54 |
| Cone Outside Diameter | 13.7 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 1 Thread Pitch | 1.25 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.63 |
| End 2 Thread Diameter | 16.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grease Fitting Included | Yes |
| Height | 86.1 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 176.3 |
| Length Stud Center to End | 2.2 |
| Length Stud Center to End | 56.0 |
| Mounting Hardware Included | Yes |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Bent |
| Weight | 1.43 |
| Width | 46.5 |
| Fits | Mitsubishi and Dodge · 32 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the original part.
Coated steel construction. Built with a steel housing and tie rod for durable steering performance.
Pre-greased design. Includes a grease fitting, dust boot, and mounting hardware for easier service.
Cross-references Beck/Arnley 101-3644, Dorman - Premium T2245PR and Mevotech Original Grade GES2245R for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Inner Tie Rod End for Mitsubishi and Dodge
Delphi TA5092 is a steering tie rod end built for the inner position on select Mitsubishi and Dodge trucks and SUVs. It is a standard replacement part with a bent steel design, pre-greased construction, and included dust boot to support precise steering linkage service.
Key Features
- Inner steering tie rod end for select Mitsubishi Mighty Max, Montero, and Dodge Ram 50 applications
- Pre-greased with grease fitting included for serviceable maintenance
- Steel housing and steel tie rod construction with coated finish
- Dust boot included with chloroprene rubber material
- Male threaded ends with clockwise thread direction on both ends
- Standard replacement design, non-adjustable
- Mounting hardware included
- Delphi part number TA5092
Detailed Description
Delphi TA5092 is engineered as an inner steering tie rod end for vehicles that need accurate steering linkage restoration. It uses dimensional and material analysis to match OE-style fitment, and Delphi subjects its steering components to temperature extremes below -40 degrees C and above 120 degrees C, along with extended salt-spray exposure, to evaluate durability in demanding conditions. This part cross-references Beck/Arnley 101-3644 for the same application. If you are servicing a Mitsubishi Mighty Max, Mitsubishi Montero, Dodge Ram 50, Dodge Power Ram 50, or Dodge D50, TA5092 provides a direct replacement option for the inner steering connection. Delphi TA5092 is a practical choice when replacing worn steering linkage components on 1982-1994 Mitsubishi and Dodge platforms.
What This Part Helps Address
- Excessive steering play from a worn inner tie rod end
- Clunking or looseness in the steering linkage
- Uneven tire wear caused by steering component wear
- Loose or imprecise steering response
- Boot damage that can expose the joint to contamination
Installation Notes and Tips
Fits 1983-1994 Mitsubishi Mighty Max, inner. Fits 1988-1993 Dodge Ram 50, inner. Fits 1983-1991 Mitsubishi Montero, inner. Fits 1983-1986 Dodge Power Ram 50, inner. Fits 1982 Dodge D50, inner. Verify thread direction, thread diameter, and position before installation. After replacement, have the steering system inspected and aligned according to vehicle service procedures.
Quality Assurance
Delphi applies OE-focused engineering to its aftermarket steering portfolio and validates parts through dimensional and material analysis for OE-style compatibility. The TA5092 is built with a coated steel housing, pre-greased joint, included grease fitting, and dust boot to support dependable steering service.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1994 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1993 | Dodge | Ram 50 | 4WD | Inner | — |
| 1993 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1992 | Dodge | Ram 50 | 4WD | Inner | — |
| 1992 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1991 | Dodge | Ram 50 | 4WD | Inner | — |
| 1991 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1991 | Mitsubishi | Montero | — | Inner | — |
| 1990 | Dodge | Ram 50 | 4WD | Inner | — |
| 1990 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1990 | Mitsubishi | Montero | — | Inner | — |
| 1989 | Dodge | Ram 50 | 4WD | Inner | — |
| 1989 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1989 | Mitsubishi | Montero | — | Inner | — |
| 1988 | Dodge | Ram 50 | 4WD | Inner | — |
| 1988 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1988 | Mitsubishi | Montero | — | Inner | — |
| 1987 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1987 | Mitsubishi | Montero | — | Inner | — |
| 1986 | Dodge | Power Ram 50 | 4WD | Inner | — |
| 1986 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1986 | Mitsubishi | Montero | — | Inner | — |
| 1985 | Dodge | Power Ram 50 | 4WD | Inner | — |
| 1985 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1985 | Mitsubishi | Montero | — | Inner | — |
| 1984 | Dodge | Power Ram 50 | 4WD | Inner | — |
| 1984 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1984 | Mitsubishi | Montero | — | Inner | — |
| 1983 | Dodge | Power Ram 50 | 4WD | Inner | — |
| 1983 | Mitsubishi | Mighty Max | 4WD | Inner | — |
| 1983 | Mitsubishi | Montero | — | Inner | — |
| 1982 | Dodge | D50 | 4WD | Inner | — |
| No rows match your filter. | |||||