/live/media/DE/DE_TA5168_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA5168 Steering Tie Rod End - Inner
| Brand | Delphi TA5168 |
|---|---|
| Position | Inner |
| Adjustable | No |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Cone Outside Diameter | 0.98 |
| Cone Outside Diameter | 25.0 |
| Dust Boot Included | No |
| End 1 Gender | Male |
| End 1 Thread Diameter | 0.866 |
| End 1 Thread Diameter | 22.0 |
| End 1 Thread Direction | Clockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 1.181 |
| End 2 Thread Diameter | 30.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grade Type | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 55.1 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 249.4 |
| Length Stud Center to End | 8.01 |
| Length Stud Center to End | 203.5 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Inner, Inner. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Straight |
| Weight | 2.51 |
| Width | 55.1 |
| Fits | Toyota · 30 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the aftermarket part.
Coated steel construction. Built with a steel housing and tie rod for added durability.
Pre-greased design. Ready to install with mounting hardware included.
Cross-references Beck/Arnley 101-5830, Beck/Arnley 101-8138 and Dorman - OE Solutions 531-930 for the same application. See all 9.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Steering Tie Rod End for Toyota
Delphi TA5168 is a straight steering tie rod end built for front inner steering service on select Toyota trucks and SUVs. It is engineered for Toyota Tundra and Toyota Sequoia applications where precise steering linkage geometry and consistent road feel matter.
Key Features
- Steering tie rod end for front inner, inner position applications
- Fits 2008-2022 Toyota Sequoia, inner
- Fits 2007-2021 Toyota Tundra, inner
- Straight design with male/male ends
- Pre-greased for service-ready installation
- Coated black finish with steel housing and steel tie rod material
- Mounting hardware included
- Standard replacement grade with threaded stud construction
- Delphi TA5168 cross-references Beck/Arnley 101-5830 and MOOG EV800293 for the same application
Detailed Description
Delphi TA5168 is a standard replacement steering tie rod end developed with OE-focused dimensional and material analysis for accurate fitment in the steering system. Delphi subjects its steering components to extreme temperature and corrosion testing, including exposure below -40 degrees C, above 120 degrees C, and extended salt spray testing, to verify durability in demanding conditions. This part is built with a steel housing, steel tie rod material, coated finish, and polyoxymethylene bearing material to support consistent steering performance on Toyota Tundra and Toyota Sequoia inner steering applications. The Delphi TA5168 is a direct-fit option for drivers servicing front inner steering wear on these Toyota platforms.
Common Issues This Part Can Address
- Loose or vague steering response at the front inner linkage
- Clunking or play from worn steering linkage components
- Uneven steering feel caused by worn tie rod end joints
- Corrosion-related wear in exposed steering hardware
- Restoring proper steering geometry after component replacement
Installation Notes and Tips
Install Delphi TA5168 in the front inner steering position only for the listed Toyota applications. Verify thread direction, thread diameter, and overall dimensions against the removed part before installation. After replacement, perform a professional wheel alignment to restore steering geometry and tire wear characteristics. Because this part is pre-greased and does not include a grease fitting or dust boot, inspect adjacent steering components for wear during service.
Quality Assurance
Delphi applies OE engineering standards to its aftermarket steering portfolio and validates parts through dimensional and material analysis for fit consistency. The brand also tests steering components under temperature and corrosion extremes to support long-term service in real-world conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2022 | Toyota | Sequoia | Inner | — |
| 2021 | Toyota | Sequoia | Inner | — |
| 2021 | Toyota | Tundra | Inner | — |
| 2020 | Toyota | Sequoia | Inner | — |
| 2020 | Toyota | Tundra | Inner | — |
| 2019 | Toyota | Sequoia | Inner | — |
| 2019 | Toyota | Tundra | Inner | — |
| 2018 | Toyota | Sequoia | Inner | — |
| 2018 | Toyota | Tundra | Inner | — |
| 2017 | Toyota | Sequoia | Inner | — |
| 2017 | Toyota | Tundra | Inner | — |
| 2016 | Toyota | Sequoia | Inner | — |
| 2016 | Toyota | Tundra | Inner | — |
| 2015 | Toyota | Sequoia | Inner | — |
| 2015 | Toyota | Tundra | Inner | — |
| 2014 | Toyota | Sequoia | Inner | — |
| 2014 | Toyota | Tundra | Inner | — |
| 2013 | Toyota | Sequoia | Inner | — |
| 2013 | Toyota | Tundra | Inner | — |
| 2012 | Toyota | Sequoia | Inner | — |
| 2012 | Toyota | Tundra | Inner | — |
| 2011 | Toyota | Sequoia | Inner | — |
| 2011 | Toyota | Tundra | Inner | — |
| 2010 | Toyota | Sequoia | Inner | — |
| 2010 | Toyota | Tundra | Inner | — |
| 2009 | Toyota | Sequoia | Inner | — |
| 2009 | Toyota | Tundra | Inner | — |
| 2008 | Toyota | Sequoia | Inner | — |
| 2008 | Toyota | Tundra | Inner | — |
| 2007 | Toyota | Tundra | Inner | — |
| No rows match your filter. | ||||