/live/media/DE/DE_TA5348_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA5348 Steering Tie Rod End - Inner or Left Inner
| Brand | Delphi TA5348 |
|---|---|
| Position | Inner |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Black |
| Cone Outside Diameter | 19.1 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 0.625 |
| End 1 Thread Diameter | 15.875 |
| End 1 Thread Direction | Clockwise |
| End 1 Threads Per Inch | 18 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.625 |
| End 2 Thread Diameter | 15.875 |
| End 2 Thread Direction | Clockwise |
| End 2 Threads Per Inch | 18 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | Yes |
| Greaseable | Yes |
| Height | 90.8 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 213.0 |
| Length Stud Center to End | 7.48 |
| Length Stud Center to End | 190.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Inner, Left Inner. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.787 |
| Tube Diameter | 20.0 |
| Type | Straight |
| Weight | 1.54 |
| Width | 43.0 |
| Fits | Chevrolet and GMC · 4 vehicles |
Standard replacement. OE expertise applied to the aftermarket steering portfolio.
Coated steel construction. Built with a steel housing and tie rod for added durability.
Pre-greased design. Includes a grease fitting and dust boot for easier service.
Cross-references 3854866, 3908296 and ES358R for the same application. See all 3.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA5348 Inner Tie Rod End
Delphi TA5348 is a steering tie rod end built for OE-style replacement performance in the steering linkage. It is a straight, greaseable inner tie rod end with a pre-greased design, dust boot, and mounting hardware included for service-ready installation.
Compatible with 1967-1970 Chevrolet C20 Suburban inner steering applications, this Delphi tie rod end supports precise steering response and proper linkage geometry. The TA5348 part number is also referenced for cross-application matching where the same OE-style fitment is required.
Key Features
- Steering tie rod end for inner position service
- Straight design with male end connections
- Pre-greased and greaseable for maintenance access
- Dust boot included to help protect the joint
- Steel housing and steel tie rod construction
- Coated black finish for corrosion resistance
- Clockwise thread direction on both ends
- Mounting hardware included
- Delphi TA5348 OE-style aftermarket replacement
Detailed Description
Delphi applies OE engineering methods to its steering portfolio, using dimensional and material analysis to match aftermarket parts to original equipment requirements. The TA5348 is tested for extreme temperature exposure and salt-spray resistance, helping verify durability in demanding steering service. Its 18 threads per inch, 0.625-inch thread diameter, and 19.1 mm cone outside diameter support accurate fitment in the steering linkage.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. For buyers searching for a Delphi TA5348 tie rod end for 1967-1970 Chevrolet C20 Suburban inner steering repair, this part provides a direct replacement path for worn steering linkage components.
What It Helps Fix
- Excessive steering play from a worn inner tie rod end
- Loose or imprecise steering feel
- Clunking or knocking from steering linkage wear
- Uneven toe settings caused by joint wear
- Boot damage that exposes the joint to contamination
Installation Notes and Tips
Install the TA5348 in the inner steering position only where listed fitment matches your vehicle. Verify thread direction, thread diameter, and overall length against the original part before assembly. After installation on a 1967-1970 Chevrolet C20 Suburban, perform a professional wheel alignment to restore steering geometry and tire wear control.
Quality Assurance
Delphi states that its steering components are validated through OE-focused dimensional and material analysis and tested across severe temperature and corrosion conditions. The TA5348 is a standard replacement part built to align with OE-style steering service expectations.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1970 | Chevrolet | C20 Suburban | Inner | — |
| 1969 | Chevrolet | C20 Suburban | Inner | — |
| 1968 | Chevrolet | C20 Suburban | Inner | — |
| 1967 | Chevrolet | C20 Suburban | Inner | — |
| No rows match your filter. | ||||