/live/media/DE/DE_TA5387_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA5387 Steering Tie Rod End - Left Outer
| Brand | Delphi TA5387 |
|---|---|
| Position | Left Outer |
| Length | 110.0 |
| Color | Black |
| End 2 Gender | Female |
| Finish | Coated |
| Pre-Greased | Yes |
| Grease Fitting Included | Yes |
| Dust Boot Included | Yes |
| Width | 69.7 |
| Type | Straight |
| Mounting Hardware Included | Yes |
| End 2 Thread Diameter | 0.9375 |
| End 2 Thread Diameter | 23.8125 |
| Height | 139.5 |
| Housing Material | Steel |
| Tube Diameter | 1.378 |
| Tube Diameter | 35.0 |
| Adjustable | No |
| Greaseable | Yes |
| Weight | 3.27 |
| Cone Outside Diameter | 26.1 |
| Bearing Material | Steel |
| End 1 Thread Direction | Clockwise |
| End 2 Thread Direction | Clockwise |
| Stud Type | Threaded |
| Length Stud Center to End | 3.15 |
| Length Stud Center to End | 80.0 |
| Dust Boot Material | Choloroprene rubber (cr) |
| Tie Rod Material | Steel |
| End 2 Threads Per Inch | 20 |
| End 1 Threads Per Inch | 16 |
| Fits | — |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a steel housing and tie rod for added durability.
Pre-greased design. Includes a grease fitting and dust boot for easier service.
Cross-references 3692946, 3892946 and ES2030R for the same application. See all 4.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA5387 Left Outer Tie Rod End
Delphi TA5387 is a steering tie rod end built as a standard replacement for the left outer position. It features a straight steel housing, coated finish, pre-greased construction, and a dust boot to support consistent steering response and joint protection.
Key Features
- Left outer steering tie rod end
- Straight design with steel tie rod and steel bearing material
- Pre-greased and greaseable with grease fitting included
- Dust boot included with chloroprene rubber construction
- Coated black finish for added corrosion resistance
- Mounting hardware included
- Thread details: 19.05 mm x 16 TPI on end 1 and 23.8125 mm x 20 TPI on end 2
Detailed Description
Delphi TA5387 is engineered for steering systems that require a direct-fit left outer tie rod end with OE-style dimensional and material analysis. Delphi subjects its steering components to extreme temperature and salt-spray testing to verify durability in harsh conditions, including exposure below -40 degrees C and above 120 degrees C, along with 720 hours of salt spray testing. That level of validation supports consistent fit and long-term service in applications such as Ford F-150 and related steering setups where precise outer tie rod geometry matters. The TA5387 part number is also referenced in interchange listings for 3692946, 3892946, ES2030R, and FTR2030R.
What It Helps Address
- Loose or vague steering feel at the front end
- Clunking or play from a worn outer tie rod joint
- Uneven tire wear caused by steering linkage wear
- Steering wheel wander or poor directional stability
- Corrosion-related joint deterioration in exposed steering components
Installation Notes and Tips
Install Delphi TA5387 on the left outer steering position only. Verify thread direction, thread diameter, and overall dimensions against the original part before installation. After replacement, perform a professional wheel alignment to restore steering geometry and tire wear characteristics. For vehicle-specific searches, this part is commonly researched for Ford F-150 steering tie rod end replacement and similar left outer steering applications.
Quality Assurance
Delphi applies OE-focused engineering and material analysis to its aftermarket steering portfolio. The TA5387 is tested for temperature extremes and salt-spray exposure to help confirm durability and fit consistency for the intended steering application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||