/live/media/DE/DE_TA5405_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA5405 Steering Tie Rod End - Inner
| Brand | Delphi TA5405 |
|---|---|
| Position | Inner |
| Adjustable | No |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Cone Outside Diameter | 0.67 |
| Cone Outside Diameter | 17.0 |
| Dust Boot Included | No |
| End 1 Gender | Male |
| End 1 Thread Diameter | 0.551 |
| End 1 Thread Diameter | 14.0 |
| End 1 Thread Direction | Clockwise |
| End 1 Thread Pitch | 1.5 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.551 |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 37.6 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 334.5 |
| Length Stud Center to End | 11.65 |
| Length Stud Center to End | 296.0 |
| Mounting Hardware Included | Yes |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Straight |
| Weight | 1.32 |
| Width | 37.6 |
| Fits | Chrysler, Dodge, and Mitsubishi · 21 vehicles |
OE expertise. Delphi applies OE know-how to its aftermarket steering portfolio.
Coated steel construction. Helps resist corrosion and stand up to demanding conditions.
Pre-greased design. Ready for installation with mounting hardware included.
Cross-references Beck/Arnley 101-4844, Beck/Arnley 101-7428 and MOOG Chassis Products EV457 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA5405 Inner Tie Rod End
Delphi TA5405 is an inner steering tie rod end built as a standard replacement for select Chrysler, Dodge, and Mitsubishi applications. It uses a steel housing and steel tie rod construction with a coated black finish, pre-greased design, and included mounting hardware for service replacement work.
Key Features
- Inner steering tie rod end for steering linkage service
- Fits 2001-2005 Chrysler Sebring, inner
- Fits 2001-2005 Dodge Stratus, inner
- Fits 2000-2005 Mitsubishi Eclipse, inner
- Fits 1999-2003 Mitsubishi Galant, inner
- Pre-greased design with no grease fitting required
- Steel housing and steel tie rod material
- Coated black finish for added surface protection
- Clockwise thread direction on both ends with 14.0 mm thread diameter and 1.5 pitch
- Standard replacement grade, Delphi TA5405
Detailed Description
Delphi TA5405 is engineered for inner steering service where precise linkage geometry matters. Delphi applies OE-focused dimensional and material analysis to help ensure proper part-to-vehicle matching, and the component is tested across extreme temperature and corrosion conditions, including exposure below -40 degrees C, above 120 degrees C, and extended salt spray testing. This part cross-references MOOG Chassis Products EV457 for the same application.
Common Steering Issues It May Address
- Excessive steering play or looseness at the inner tie rod
- Clunking or knocking from the steering linkage
- Uneven tire wear caused by worn steering components
- Imprecise steering response during lane changes or turns
- Failed inspection due to worn steering linkage parts
Installation Notes
Verify thread direction, thread pitch, and position before installation. Delphi TA5405 is a straight, non-adjustable inner tie rod end with threaded stud ends and included mounting hardware. After installation, perform a professional wheel alignment to restore steering geometry. Confirm fitment for your specific Chrysler Sebring, Dodge Stratus, Mitsubishi Eclipse, or Mitsubishi Galant application before service.
Quality Assurance
Delphi uses OE-based engineering and validation methods for its aftermarket steering portfolio. TA5405 is built with standard replacement specifications and tested for temperature and corrosion resistance to support consistent service performance.
| Year | Make | Model | Body Type | Position | Notes |
|---|---|---|---|---|---|
| 2005 | Chrysler | Sebring | Coupe | Inner | — |
| 2005 | Dodge | Stratus | Coupe | Inner | — |
| 2005 | Mitsubishi | Eclipse | — | Inner | — |
| 2004 | Chrysler | Sebring | Coupe | Inner | — |
| 2004 | Dodge | Stratus | Coupe | Inner | — |
| 2004 | Mitsubishi | Eclipse | — | Inner | — |
| 2003 | Chrysler | Sebring | Coupe | Inner | — |
| 2003 | Dodge | Stratus | Coupe | Inner | — |
| 2003 | Mitsubishi | Eclipse | — | Inner | — |
| 2003 | Mitsubishi | Galant | — | Inner | — |
| 2002 | Chrysler | Sebring | Coupe | Inner | — |
| 2002 | Dodge | Stratus | Coupe | Inner | — |
| 2002 | Mitsubishi | Eclipse | — | Inner | — |
| 2002 | Mitsubishi | Galant | — | Inner | — |
| 2001 | Chrysler | Sebring | Coupe | Inner | — |
| 2001 | Dodge | Stratus | Coupe | Inner | — |
| 2001 | Mitsubishi | Eclipse | — | Inner | — |
| 2001 | Mitsubishi | Galant | — | Inner | — |
| 2000 | Mitsubishi | Eclipse | — | Inner | — |
| 2000 | Mitsubishi | Galant | — | Inner | — |
| 1999 | Mitsubishi | Galant | — | Inner | — |
| No rows match your filter. | |||||