/live/media/DE/DE_TA5424_Fro.jpg)
Delphi TA5424 Steering Tie Rod End - Outer
| Brand | Delphi TA5424 |
|---|---|
| Position | Outer |
| Adjustable | No |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 1 Thread Pitch | 1.25 |
| End 2 Gender | Female |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| End 2 Threads Per Inch | 17 |
| Friction Material Thickness | Coated |
| Grade | Premium |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 105.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 435.0 |
| Length Stud Center to End | 2.15 |
| Length Stud Center to End | 54.6 |
| Position(s) | Front Left Outer, Front Right Outer, Outer. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Straight |
| Weight | 1.16 |
| Width | 65.0 |
| Fits | Acura · 14 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a steel housing and tie rod for added durability.
Pre-greased design. Includes a dust boot and arrives ready for installation.
Cross-references Beck/Arnley 101-7656, Dorman - Premium TO50065PR and MOOG Chassis Products ES801172 for the same application. See all 8.
OE-Style Steering Tie Rod End for Acura RDX
Delphi TA5424 is a premium steering tie rod end built for front outer steering applications on the 2007-2020 Acura RDX. It combines OE-focused dimensional control with a coated steel housing, pre-greased construction, and a dust boot to support consistent steering response and long service life.
Key Features
- Steering tie rod end for front outer applications
- Fits 2007-2020 Acura RDX, outer
- Pre-greased design with dust boot included
- Steel housing with coated finish
- Straight, non-adjustable construction
- Male and female threaded ends with clockwise thread direction
- Premium-grade replacement part
- Delphi TA5424 part number for catalog matching
Detailed Description
Delphi TA5424 is engineered as a standard replacement steering tie rod end for Acura RDX models from 2007 through 2020 in outer steering positions. Delphi applies OE dimensional and material analysis to help ensure proper fitment and consistent interface with the steering linkage. The steel tie rod body, coated finish, and chloroprene rubber dust boot are selected to support durability in demanding road and weather conditions. This part cross-references MOOG Chassis Products ES801172 for the same application.
Use Delphi TA5424 when replacing a worn outer tie rod end on a 2007-2020 Acura RDX. The part number TA5424 is also useful when searching for an OE-style steering tie rod end with pre-greased service-ready construction and no grease fitting.
Common Issues This Part May Solve
- Excessive steering play or looseness at the wheel
- Clunking or knocking from the front steering linkage
- Uneven tire wear caused by worn outer tie rod components
- Steering wander or poor directional stability
- Damaged dust boot or corrosion at the tie rod end
Installation Notes and Tips
Fits 2007-2020 Acura RDX, outer. Confirm the vehicle’s steering position before ordering, since this part is listed for front left outer, front right outer, and outer applications depending on the vehicle configuration. After installation, a professional wheel alignment is recommended to restore correct steering geometry. Verify thread direction, thread diameter, and end style against the removed part before service. Delphi TA5424 is pre-greased and does not include a grease fitting.
Quality Assurance
Delphi tests steering components across extreme temperature ranges below -40 degrees C and above 120 degrees C, and subjects parts to 720 hours of salt spray exposure. That validation, along with OE-based dimensional and material analysis, supports consistent aftermarket replacement quality for Acura RDX steering service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2020 | Acura | RDX | Outer | — |
| 2019 | Acura | RDX | Outer | — |
| 2018 | Acura | RDX | Outer | — |
| 2017 | Acura | RDX | Outer | — |
| 2016 | Acura | RDX | Outer | — |
| 2015 | Acura | RDX | Outer | — |
| 2014 | Acura | RDX | Outer | — |
| 2013 | Acura | RDX | Outer | — |
| 2012 | Acura | RDX | Outer | — |
| 2011 | Acura | RDX | Outer | — |
| 2010 | Acura | RDX | Outer | — |
| 2009 | Acura | RDX | Outer | — |
| 2008 | Acura | RDX | Outer | — |
| 2007 | Acura | RDX | Outer | — |
| No rows match your filter. | ||||