/live/media/DE/DE_TA5524_Fro.jpg)
Delphi TA5524 Steering Tie Rod End - Right or Right Outer
| Brand | Delphi TA5524 |
|---|---|
| Position | Right Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Black |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 0.688 |
| End 1 Thread Direction | Clockwise |
| End 1 Threads Per Inch | 18 |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.563 |
| End 2 Thread Direction | Clockwise |
| End 2 Threads Per Inch | 18 |
| Friction Material Thickness | Coated |
| Grade | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 93.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 108.0 |
| Length Stud Center to End | 3.445 |
| Length Stud Center to End | 87.5 |
| Mounting Hardware Included | Yes |
| Position(s) | Right, Right Outer. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | No |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Straight |
| Weight | 1.01 |
| Width | 41.0 |
| Fits | International and Studebaker |
Standard replacement. Built as an OE-compatibility aftermarket steering part.
Coated steel construction. Helps resist wear in demanding conditions.
Dust boot included. Adds protection for the tie rod end assembly.
Cross-references 185121R91, 666193 and ES262R for the same application. See all 3.
Delphi TA5524 Steering Tie Rod End
Delphi TA5524 is a standard replacement steering tie rod end built for the right outer steering position. It uses a steel housing, coated finish, and included dust boot and mounting hardware to support a direct-service replacement for steering linkage wear.
Fits 2006-2011 Honda Civic, right outer. Fits 2006-2011 Honda Civic, right. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Key Features
- Part number: TA5524
- Steering tie rod end for right, right outer position
- Steel housing with coated finish
- Dust boot included
- Mounting hardware included
- Male threaded ends with clockwise thread direction
- Standard replacement grade
- Non-adjustable, non-greaseable design
Detailed Description
Delphi TA5524 is engineered as a steering tie rod end for vehicles that require a right-side outer linkage component. The straight design, steel construction, and protective coating support consistent fit and corrosion resistance in everyday driving conditions. Delphi applies dimensional and material analysis to help match OE-style geometry and material characteristics, and the part is tested across extreme temperature and salt-spray exposure conditions to verify durability in demanding environments. For Honda Civic steering repair work, TA5524 provides a focused replacement option when the outer tie rod end shows looseness, noise, or alignment-related wear.
What It Helps Fix
- Steering play or looseness at the right outer tie rod end
- Clunking or knocking from worn steering linkage joints
- Uneven tire wear caused by steering component wear
- Alignment drift after tie rod end deterioration
- Boot damage that exposes the joint to road contamination
Installation Notes and Tips
Confirm vehicle application by year, make, model, and steering position before installation. This part is listed for the right, right outer position; verify the vehicle-specific application tab for exact placement. After installation, a professional wheel alignment is recommended to restore steering geometry. Inspect adjacent steering components, including the inner tie rod and related hardware, for wear before completing the repair.
Quality Assurance
Delphi uses OE-focused engineering methods for its aftermarket steering portfolio, including dimensional and material checks to support OE-style compatibility. The part is also subjected to temperature and corrosion testing to evaluate performance in harsh service conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||