/live/media/DE/DE_TA5545_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA5545 Steering Tie Rod End - Right Outer
| Brand | Delphi TA5545 |
|---|---|
| Position | Right Outer |
| Length | 175.0 |
| Color | Black |
| End 1 Gender | Male |
| End 2 Gender | Male |
| Finish | Coated |
| Pre-Greased | Yes |
| Grease Fitting Included | Yes |
| Dust Boot Included | Yes |
| Width | 69.0 |
| Type | Straight |
| Mounting Hardware Included | Yes |
| End 2 Thread Diameter | 1.125 |
| End 2 Thread Diameter | 28.38 |
| Height | 131.1 |
| Housing Material | Steel |
| Tube Diameter | 1.125 |
| Tube Diameter | 28.38 |
| Adjustable | No |
| Greaseable | Yes |
| Weight | 3.96 |
| Cone Outside Diameter | 29.9 |
| Bearing Material | Steel |
| End 1 Thread Direction | Clockwise |
| End 2 Thread Direction | Clockwise |
| Stud Type | Threaded |
| Length Stud Center to End | 141.0 |
| Length Stud Center to End | 5.551 |
| Dust Boot Material | Choloroprene rubber (cr) |
| Tie Rod Material | Steel |
| End 2 Threads Per Inch | 12 |
| Fits | — |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a steel housing and tie rod for durability.
Pre-greased design. Includes a grease fitting and dust boot for easier service.
Cross-references 8-12548-108-0, 15619286 and ES3275R for the same application. See all 3.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA5545 Right Outer Tie Rod End
Delphi TA5545 is a standard replacement steering tie rod end built for the right outer position. It uses a straight steel housing with a coated finish, pre-greased construction, and a dust boot to support consistent steering response in everyday driving.
Key Features
- Right outer steering tie rod end for direct replacement service
- Straight design with steel tie rod and steel bearing material
- Pre-greased with grease fitting included for serviceability
- Dust boot included with chloroprene rubber construction
- Coated black finish for added corrosion resistance
- Threaded stud design with mounting hardware included
- OE-focused dimensional and material analysis for fit consistency
Detailed Description
The Delphi TA5545 steering tie rod end is engineered for the right outer side of the steering linkage and is built as a standard replacement part. Delphi applies OE-level dimensional and material analysis to help maintain proper compatibility between the replacement component and the original steering system. This part is cross-referenced to Monroe Shocks & Struts 172286 and 182286 for the same application. It is a practical choice for drivers searching for a Delphi TA5545 tie rod end, right outer steering tie rod end, or a replacement steering component for Chevrolet and GMC truck applications.
What It Helps Address
- Loose or imprecise steering feel
- Clunking or play in the outer steering linkage
- Uneven tire wear caused by worn steering components
- Steering wheel wander or poor directional stability
- Corrosion-related wear on the outer tie rod end
Installation Notes and Tips
Verify the right outer position before installation and confirm thread direction, thread diameter, and stud dimensions against the original part. After replacement, a professional wheel alignment is recommended to restore steering geometry and tire wear characteristics. This part is listed for Chevrolet and GMC truck fitment in the right outer steering position, so confirm vehicle-specific application details before ordering.
Quality Assurance
Delphi tests steering components across extreme temperature ranges and salt-spray exposure to evaluate durability under demanding conditions. The brand’s OE-focused engineering and material analysis support consistent replacement quality for steering service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||