/live/media/DE/DE_TA5558_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA5558 Steering Tie Rod End - Left Outer
| Brand | Delphi TA5558 |
|---|---|
| Position | Left Outer |
| Length | 103.0 |
| Color | Black |
| End 1 Gender | Male |
| End 2 Gender | Male |
| Finish | Coated |
| Pre-Greased | No |
| Grease Fitting Included | No |
| Dust Boot Included | Yes |
| Width | 46.0 |
| Type | Straight |
| Mounting Hardware Included | Yes |
| End 2 Thread Diameter | 16.0 |
| Height | 95.0 |
| Housing Material | Steel |
| Adjustable | No |
| Greaseable | No |
| Weight | 1.35 |
| Bearing Material | Plastic |
| End 1 Thread Direction | Counterclockwise |
| End 2 Thread Direction | Clockwise |
| Grade | Standard |
| Stud Type | Threaded |
| End 2 Thread Pitch | 1.5 |
| End 1 Thread Pitch | 1.5 |
| Length Stud Center to End | 86.0 |
| Dust Boot Material | Choloroprene rubber (cr) |
| Tie Rod Material | Steel |
| End 1 Thread Diameter | 22.0 |
| Item Grade | Standard replacement |
| Fits | — |
OE expertise. Delphi applies OE engineering to its aftermarket steering portfolio.
Coated steel construction. Built with a steel housing and tie rod for added durability.
Dust boot included. Helps protect the joint from dirt and moisture.
Cross-references MOOG Chassis Products ES800744, 97222510 and 8971073492 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA5558 Left Outer Tie Rod End
Delphi TA5558 is a standard replacement steering tie rod end built for the left outer position. It uses a straight steel housing with a coated finish, a dust boot, and included mounting hardware for a direct service replacement on select applications.
Key Features
- Part number TA5558 for steering service identification
- Left outer steering tie rod end
- Straight design with steel tie rod and steel housing
- Coated black finish for added surface protection
- Dust boot included with chloroprene rubber construction
- Male threaded ends with 22.0 mm and 16.0 mm thread diameters
- Standard replacement grade for OE-style service
- Mounting hardware included
Detailed Description
Delphi TA5558 is engineered as a standard replacement steering tie rod end for the left outer side. Delphi applies OE-focused dimensional and material analysis to help ensure proper fit and consistent steering geometry, and the part is tested for temperature extremes and salt-spray exposure to support durability in demanding road conditions. This makes it a practical choice for steering repair on vehicles such as Toyota and other applications that use this configuration.
This part cross-references MOOG Chassis Products ES800744 for the same application.
What It Helps Fix
- Excessive steering play at the left outer tie rod end
- Clunking or looseness from worn steering linkage components
- Uneven tire wear caused by steering end wear
- Imprecise steering response during lane changes or turns
- Boot damage that can expose the joint to contamination
Installation Notes
Verify thread direction, thread diameter, and left outer position before installation. The part uses a counterclockwise thread on end 1 and a clockwise thread on end 2, with a threaded stud design. After installation, perform a professional wheel alignment to restore steering angle and tire wear settings. Confirm vehicle-specific fitment for the exact make, model, and year before ordering.
Quality Assurance
Delphi uses OE-based engineering methods, dimensional checks, and material analysis to support aftermarket steering performance. The part is also subjected to temperature and corrosion testing to help validate durability in service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||