/live/media/DE/DE_TA6310_Fro.jpg)
Delphi TA6310 Steering Tie Rod End - Right Outer
| Brand | Delphi TA6310 |
|---|---|
| Position | Right Outer |
| Color | Black |
| End 1 Gender | Male |
| End 2 Gender | Male |
| Finish | Coated |
| Pre-Greased | Yes |
| Grease Fitting Included | Yes |
| Dust Boot Included | Yes |
| Width | 63.0 |
| Type | Bent |
| Mounting Hardware Included | Yes |
| End 2 Thread Diameter | 16.0 |
| Height | 151.0 |
| Housing Material | Steel |
| Adjustable | Yes |
| Greaseable | Yes |
| Weight | 12.21 |
| Cone Outside Diameter | 0.815 |
| Bearing Material | Polyoxymethilen (pom) |
| End 1 Thread Direction | Counterclockwise |
| End 2 Thread Direction | Clockwise |
| Stud Type | Threaded |
| End 2 Thread Pitch | 1.5 |
| Length Stud Center to End | 22.638 |
| Length Stud Center to End | 575.0 |
| Dust Boot Material | Neoprene rubber |
| Tie Rod Material | Steel |
| End 1 Threads Per Inch | 12 |
| End 1 Thread Diameter | 1.5625 |
| Item Grade | Standard replacement |
| Fits | — |
Standard replacement. OE-style steering tie rod end for dependable fit and function.
Coated steel construction. Helps resist corrosion while maintaining strength in service.
Pre-greased design. Includes a dust boot and grease fitting for easier maintenance.
Cross-references 2C2Z 3A131-CA for the same application. See all 1.
Delphi TA6310 Right Outer Tie Rod End
Delphi TA6310 is a standard replacement steering tie rod end built for the right outer position. It features a bent steel housing, pre-greased construction, a grease fitting, and a dust boot to support precise steering response and long-term service in demanding road conditions.
Key Features
- Right outer steering tie rod end
- Standard replacement part: Delphi TA6310
- Bent design with steel housing and steel tie rod material
- Pre-greased with grease fitting included
- Dust boot included with neoprene rubber material
- Adjustable and greaseable for alignment service
- Coated black finish for added corrosion resistance
- Mounting hardware included
Detailed Description
Delphi TA6310 is engineered for steering systems that require a right outer tie rod end with OE-style dimensional and material consistency. Delphi applies its OE-focused testing approach to the aftermarket steering portfolio, including exposure to extreme temperatures and extended salt spray testing, to help verify durability in harsh environments. The steel housing, threaded stud design, and POM bearing material support stable steering linkage operation, while the included dust boot helps protect internal components from contamination. This part cross-references 2C2Z 3A131-CA for the same application. For Ford F-150 steering repair work, Delphi TA6310 provides a direct replacement option when the right outer tie rod end is worn or loose.
What This Part Helps Address
- Steering play or looseness at the front end
- Uneven tire wear caused by worn steering linkage
- Clunking or knocking from the outer tie rod area
- Imprecise steering wheel response
- Alignment instability after suspension or steering wear
Installation Notes and Tips
Install Delphi TA6310 at the right outer steering position and verify thread direction, thread diameter, and stud dimensions before assembly. Because this tie rod end is adjustable and greaseable, it should be aligned after installation to restore proper toe settings. A professional front-end inspection is recommended whenever steering components are replaced. Confirm application details for Ford F-150 service and compare the original part number TA6310 before installation.
Quality Assurance
Delphi uses OE-based engineering and dimensional analysis to support aftermarket steering fit and function. The part is tested for temperature extremes and salt spray exposure to help validate durability in real-world driving conditions. Delphi TA6310 is built as a standard replacement steering component for consistent service performance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||