/live/media/DE/DE_TA6391_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA6391 Steering Tie Rod End - Inner
| Brand | Delphi TA6391 |
|---|---|
| Position | Inner |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black and Gray |
| Dust Boot Included | No |
| End 1 Gender | Male |
| End 1 Thread Diameter | 16.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Male |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 37.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 252.0 |
| Length Stud Center to End | 8.46 |
| Length Stud Center to End | 215.0 |
| Mounting Hardware Included | Yes |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.63 |
| Tube Diameter | 16.0 |
| Type | Straight |
| Weight | 1.1 |
| Width | 939.8 |
| Fits | Honda · 6 vehicles |
Standard replacement. Built as a direct-fit steering tie rod end for straightforward service.
Coated steel construction. Helps resist corrosion while keeping the assembly strong.
Pre-greased design. Ready for installation with mounting hardware included.
Cross-references Beck/Arnley 101-6869, MOOG Chassis Products EV800633 and 101-7786 for the same application. See all 4.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Inner Tie Rod End for Honda Fit
Delphi TA6391 is a standard replacement inner steering tie rod end built for 2009-2014 Honda Fit applications. It combines OE-based dimensional and material analysis with tested durability for consistent steering response and proper fit.
Key Features
- Fits 2009-2014 Honda Fit, inner position
- OE-style steering tie rod end for direct replacement use
- Pre-greased for initial service readiness
- Steel housing and steel tie rod construction
- Coated black and gray finish for added surface protection
- Threaded stud design with clockwise thread direction on both ends
- Mounting hardware included
- Delphi part number TA6391
Detailed Description
Delphi TA6391 is an inner steering tie rod end engineered for the 2009-2014 Honda Fit. It is built as a standard replacement part with a straight design, male threaded ends, and a pre-greased construction to support smooth steering linkage operation. The steel housing, steel tie rod material, and coated finish are selected for everyday road use, while the Polyoxymethilen (POM) bearing material supports consistent movement at the steering connection.
Delphi applies OE-focused dimensional and material analysis to help ensure proper interchange with the original steering component. This part cross-references Beck/Arnley 101-6869 and MOOG Chassis Products EV800633 for the same application. If you are searching for a Honda Fit inner tie rod end, Delphi TA6391 provides a direct-fit replacement option for the steering gear and related components category.
What It Helps Address
- Loose or vague steering feel at the inner tie rod connection
- Steering play caused by worn linkage components
- Clunking or knocking from the steering rack area
- Uneven steering response from a deteriorated inner tie rod end
- Restoration of proper steering geometry after wear-related replacement
Installation Notes and Tips
Verify the vehicle is a 2009-2014 Honda Fit with an inner tie rod end application before installation. Inspect the steering rack, outer tie rod end, and related hardware for wear before reassembly. Because this part is pre-greased and not greaseable, no grease fitting is provided. Confirm thread direction and thread diameter match the original component during service.
Quality Assurance
Delphi subjects steering components to temperature extremes below -40 degrees C and above 120 degrees C, along with extended salt-spray exposure, to evaluate durability in demanding conditions. TA6391 is built using OE-oriented engineering practices for fit and performance consistency.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2014 | Honda | Fit | Inner | — |
| 2013 | Honda | Fit | Inner | — |
| 2012 | Honda | Fit | Inner | — |
| 2011 | Honda | Fit | Inner | — |
| 2010 | Honda | Fit | Inner | — |
| 2009 | Honda | Fit | Inner | — |
| No rows match your filter. | ||||