/live/media/DE/DE_TA870_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA870 Steering Tie Rod End - Outer or Right Outer
| Brand | Delphi TA870 |
|---|---|
| Position | Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Black |
| Cone Outside Diameter | 17.5 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Male |
| End 2 Thread Diameter | 0.688 |
| End 2 Thread Diameter | 17.4625 |
| End 2 Thread Direction | Clockwise |
| End 2 Threads Per Inch | 16 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 96.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 3.386 |
| Length Stud Center to End | 86.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Outer, Front Rearward, Front Right Outer, Rear Outer, Rear Right. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.688 |
| Tube Diameter | 17.4625 |
| Type | Straight |
| Weight | 1.07 |
| Width | 40.0 |
| Fits | Land Rover · 19 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel housing. Built for durability with a pre-greased, sealed design.
Mounting hardware included. Straight tie rod end with threaded studs for installation.
Cross-references Mevotech Supreme MS10662, Mevotech Supreme MS10663 and 534-845 for the same application. See all 11.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA870 Steering Tie Rod End
Delphi TA870 is a standard replacement steering tie rod end built for front outer and rear outer applications where precise steering linkage geometry matters. It is engineered with OE-focused dimensional and material analysis to help maintain proper fit on select Land Rover Discovery, Defender, and Range Rover models.
Key Features
- Pre-greased design for ready-to-install service
- Dust boot included to help protect the joint from road contamination
- Steel housing and steel tie rod construction
- Coated black finish for added corrosion resistance
- Straight, non-adjustable design
- Male end connections with threaded stud type
- Mounting hardware included
- Grease fitting not included; non-greaseable design
Detailed Description
The Delphi TA870 steering tie rod end is built for OE-style replacement performance in steering systems that demand accurate alignment and consistent response. Delphi subjects its steering components to extreme temperature and salt-spray testing, then validates dimensions and materials to support proper compatibility with the original part design. This makes the TA870 a practical choice for Land Rover Discovery steering repair, as well as select Defender 90, Defender 110, and Range Rover right outer applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The Delphi TA870 also cross-references part numbers such as ES800273 and TO35032.
What It Helps Address
- Loose or wandering steering feel
- Clunking or play in the steering linkage
- Uneven front-end alignment caused by worn tie rod ends
- Steering response issues from damaged dust boot or joint wear
- Replacement needs on Land Rover Discovery, Defender 90, Defender 110, and Range Rover steering systems
Installation Notes and Tips
Fits 1994-1999 Land Rover Discovery, Outer. Fits 1994-1995 Land Rover Defender 90, Right Outer. Fits 1997 Land Rover Defender 90, Right Outer. Fits 1993 Land Rover Defender 110, Right Outer. Fits 1987-1995 Land Rover Range Rover, Right Outer, with 11/16in x 16 Threads.
Verify thread direction, thread diameter, and position before installation. This TA870 uses clockwise thread direction on both ends, a 0.472 in / 12.0 mm end 1 thread diameter, and a 0.688 in / 17.4625 mm end 2 thread diameter. After installation, steering alignment should be checked to confirm correct toe and steering wheel position.
Quality Assurance
Delphi applies OE safety technology and aftermarket steering expertise to this part, with testing that includes temperatures below -40 degrees C, above 120 degrees C, and 720 hours of salt spray exposure. The TA870 is built as a standard replacement steering tie rod end for dependable service in the specified Land Rover applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1999 | Land Rover | Discovery | Outer | — |
| 1998 | Land Rover | Discovery | Outer | — |
| 1997 | Land Rover | Defender 90 | Right Outer | — |
| 1997 | Land Rover | Discovery | Outer | — |
| 1996 | Land Rover | Discovery | Outer | — |
| 1995 | Land Rover | Defender 90 | Right Outer | — |
| 1995 | Land Rover | Discovery | Outer | — |
| 1995 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| 1994 | Land Rover | Defender 90 | Right Outer | — |
| 1994 | Land Rover | Discovery | Outer | — |
| 1994 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| 1993 | Land Rover | Defender 110 | Right Outer | — |
| 1993 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| 1992 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| 1991 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| 1990 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| 1989 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| 1988 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| 1987 | Land Rover | Range Rover | Right Outer | with 11/16in x 16 Threads |
| No rows match your filter. | ||||