/live/media/DE/DE_TC110_Fro.jpg)
Delphi TC110 Suspension Ball Joint - Front Lower
| Brand | Delphi TC110 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | No |
| Color | Gray |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 3.386 |
| Height | 86.0 |
| Item Grade | Standard Replacement |
| Length | 48 |
| Material | Steel |
| Maximum Outside Diameter | 1.89 |
| Maximum Outside Diameter | 48.0 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Pressed |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.63 |
| Stud Tapered End 1 Diameter | 16.0 |
| Stud Tapered End 2 Diameter | 0.715 |
| Stud Tapered End 2 Diameter | 18.15 |
| Stud Thread Diameter | 0.551 |
| Stud Thread Diameter | 14.0 |
| Stud Thread Length | 0.713 |
| Stud Thread Length | 18.1 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 48.0 |
| Fits | Volvo |
Standard replacement. OE-style fit and function for dependable suspension service.
Steel construction. Built with a dust boot and pressed mounting for lasting support.
OE expertise. Delphi applies dimensional and material analysis for compatibility.
Cross-references 101-0677, 675085 and 683303 for the same application. See all 5.
Delphi TC110 Front Lower Ball Joint
Delphi TC110 is a standard replacement suspension ball joint built for front lower applications. It combines a steel body, pressed mounting design, and a dust boot to support steering and suspension movement in service.
Key Features
- Front lower suspension ball joint assembly
- Steel construction with gray finish
- Pressed mounting type for OE-style service applications
- Dust boot included; chloroprene rubber (CR) boot material
- Standard replacement, non-adjustable, non-greaseable design
- Threaded tapered stud with 14.0 mm stud thread diameter and 1.5 pitch
- Mounting hardware and nuts included
Product Details
Delphi TC110 is engineered for front lower suspension service where precise joint movement and stable steering response matter. Delphi applies OE-focused dimensional and material analysis to its aftermarket steering portfolio, and this ball joint is tested across extreme temperature ranges and salt-spray exposure to support durability in demanding road conditions. For drivers searching for a front lower ball joint for Honda Civic or Acura Integra applications, Delphi TC110 provides an OE-style replacement option with the correct pressed-in format and tapered stud design.
This part cross-references Monroe Shocks & Struts (e.g., 101-0677, 675085) for the same application. Delphi TC110 is a direct-fit style suspension ball joint for front lower service where the original joint is pressed into the control arm or suspension arm assembly.
Common Problems This Part Can Address
- Excessive front-end looseness or play
- Clunking or knocking from the lower suspension area
- Uneven tire wear caused by worn suspension geometry
- Steering wander or reduced directional stability
- Visible boot damage or joint contamination
Installation Notes and Tips
Confirm the vehicle uses a pressed front lower ball joint before ordering. Inspect the control arm, knuckle, and surrounding hardware for wear or damage during replacement. Because this is a pressed design, proper removal and installation tools are required to avoid damaging the suspension components. Verify stud taper, thread size, and mounting dimensions against the original part before installation.
Quality Assurance
Delphi uses OE-based engineering and validation methods for its steering and suspension parts. TC110 is evaluated for temperature extremes and corrosion exposure to help maintain performance in real-world driving conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||