/live/media/DE/DE_TC1179_Ang.jpg)
Delphi TC1179 Suspension Control Arm and Ball Joint Assembly - Front Lower Forward
| Brand | Delphi TC1179 |
|---|---|
| Position | Front Lower Forward |
| Adjustable | No |
| Ball Joint Stud Length | 54.6 |
| Ball Joint Stud Type | Pinch |
| Ball Joint Thread Diameter | 12.0 |
| Bushing Material | Natural Rubber (NR) |
| Bushings Included | Yes |
| Control Arm Color | Silver |
| Control Arm Construction | Casting/Forged |
| Control Arm Material | Aluminum |
| Control Arm Maximum Length | 14.37 |
| Control Arm Maximum Length | 365.0 |
| Control Arm Maximum Width | 2.362 |
| Control Arm Maximum Width | 60.0 |
| Grease Fitting Included | No |
| Greaseable | No |
| Item Grade | Standard Replacement |
| Mounting Hardware Included | No |
| Mounting Hole Diameter | 12.2 |
| Mounting Hole Quantity | 1 |
| Pre-Greased | No |
| Suspension Grade Type | Light |
| Fits | Audi · 25 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Aluminum construction. Lightweight casting/forged design with natural rubber bushings.
Ball joint assembly. Combines the control arm and ball joint in one part.
Cross-references Beck/Arnley 102-5819, Dorman - OE Solutions 520-976 and Mevotech Supreme CMK80524 for the same application. See all 18.
Delphi TC1179 Front Lower Forward Control Arm
Delphi TC1179 is a standard replacement suspension control arm and ball joint assembly for the front lower forward position. It is built with an aluminum casting/forged construction, natural rubber bushings, and a pinch-style ball joint stud for OE-style fitment on select Audi applications.
For Audi A4, A4 Quattro, S4, and RS4 models, this Delphi control arm is engineered to match OE dimensional and material requirements. Delphi applies extensive temperature and corrosion testing to help the part perform in demanding suspension environments.
Key Features
- Part number: TC1179
- Front lower forward suspension control arm and ball joint assembly
- Aluminum casting/forged construction
- Natural rubber bushings included
- Pinch-style ball joint stud
- Standard replacement grade
- Not pre-greased and not greaseable
- No mounting hardware included
- Compatible with select Audi A4, A4 Quattro, S4, and RS4 fitments
Detailed Description
Delphi TC1179 is built for the front lower forward suspension position and is intended for direct replacement on listed Audi platforms. The aluminum arm construction helps maintain OE-style geometry, while the included bushings and ball joint assembly support proper suspension articulation and steering response. Delphi’s OE-focused dimensional and material analysis helps ensure the replacement part aligns with the original application requirements. This part cross-references Beck/Arnley 102-5819 for the same application.
What It Helps Address
- Front-end clunking or knocking from worn suspension joints
- Excessive play in the front lower forward control arm
- Uneven tire wear caused by suspension looseness
- Steering wander or reduced directional stability
- Suspension noise from deteriorated bushings or ball joint wear
Installation Notes and Tips
Verify chassis and VIN breakpoints before ordering, especially on 2002-2009 Audi A4 and 2006-2008 Audi A4 applications with chassis-specific notes. Fits 2002-2009 Audi A4 Quattro, front lower forward; fits 2004-2009 Audi S4, front lower forward; fits 2007-2008 Audi RS4, front lower forward; fits 2002 Audi S4, front lower forward; fits 2005 Audi A4, front lower forward; fits 2002-2004 Audi A4, front lower forward; fits 2006-2007 Audi A4, front lower forward; fits 2008 Audi A4, front lower forward; fits 2009 Audi A4, front lower forward. A professional alignment is recommended after suspension service.
Quality Assurance
Delphi tests this steering and suspension component for extreme temperature exposure and salt-spray corrosion resistance, and uses OE-level dimensional and material analysis to support fit and performance consistency. Part number TC1179 is built as a standard replacement for the listed Audi front lower forward applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2009 | Audi | A4 | Front Lower Forward | with Chassis # 8E5 400001 - 8E8 250000 |
| 2009 | Audi | A4 Quattro | Front Lower Forward | — |
| 2009 | Audi | S4 | Front Lower Forward | — |
| 2008 | Audi | A4 | Front Lower Forward | To Chassis # 8E5 400001 - 8E8 250000 |
| 2008 | Audi | A4 Quattro | Front Lower Forward | — |
| 2008 | Audi | RS4 | Front Lower Forward | — |
| 2008 | Audi | S4 | Front Lower Forward | — |
| 2007 | Audi | A4 | Front Lower Forward | with Chassis # 8E5 400001 - 8E8 250000 |
| 2007 | Audi | A4 Quattro | Front Lower Forward | — |
| 2007 | Audi | RS4 | Front Lower Forward | — |
| 2007 | Audi | S4 | Front Lower Forward | — |
| 2006 | Audi | A4 | Front Lower Forward | with Chassis # 8E5 400001 - 8E8 250000 |
| 2006 | Audi | A4 Quattro | Front Lower Forward | — |
| 2006 | Audi | S4 | Front Lower Forward | — |
| 2005 | Audi | A4 | Front Lower Forward | Fits multiple vehicles with standard design for Suspension Control Arm and Ball Joint Assembly. |
| 2005 | Audi | A4 Quattro | Front Lower Forward | — |
| 2005 | Audi | S4 | Front Lower Forward | — |
| 2004 | Audi | A4 | Front Lower Forward | Standard Design; To Chassis # 8E5 400000; From VIN # 8E-2-000-001 |
| 2004 | Audi | A4 Quattro | Front Lower Forward | — |
| 2004 | Audi | S4 | Front Lower Forward | — |
| 2003 | Audi | A4 | Front Lower Forward | Standard Design; To Chassis # 8E5 400000; From VIN # 8E-2-000-001 |
| 2003 | Audi | A4 Quattro | Front Lower Forward | — |
| 2002 | Audi | A4 | Front Lower Forward | Standard Design; To Chassis # 8E5 400000; From VIN # 8E-2-000-001 |
| 2002 | Audi | A4 Quattro | Front Lower Forward | — |
| 2002 | Audi | S4 | Front Lower Forward | — |
| No rows match your filter. | ||||