/live/media/DE/DE_TC1192_Ang.jpg)
Delphi TC1192 Suspension Ball Joint - Front Lower
| Brand | Delphi TC1192 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | No |
| Color | Black |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Distance Between Mounting Holes | 75.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 3.819 |
| Height | 97.0 |
| Item Grade | Standard Replacement |
| Length | 48 |
| Material | Steel |
| Maximum Outside Diameter | 1.26 |
| Maximum Outside Diameter | 32.0 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter | 0.591 |
| Mounting Bolt Head Diameter | 15.0 |
| Mounting Bolt Length | 1.346 |
| Mounting Bolt Length | 34.2 |
| Mounting Bolt Shank Diameter | 0.394 |
| Mounting Bolt Shank Diameter | 10.0 |
| Mounting Bolt Thread Diameter | 10.0 |
| Mounting Bolt Thread Length | 0.984 |
| Mounting Bolt Thread Length | 25.0 |
| Mounting Bolt Thread Pitch | 1.5 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 2 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Stud Thread Diameter | 0.472 |
| Stud Thread Diameter | 12.0 |
| Stud Thread Length | 0.972 |
| Stud Thread Length | 24.7 |
| Stud Thread Pitch | 1.75 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | No |
| Washers Included | No |
| Width | 97.0 |
| Wrench Size | 0.591 |
| Wrench Size | 15.0 |
| Fits | Volvo · 27 vehicles |
Standard replacement. OE expertise helps ensure compatibility with the original part.
Bolt-on installation. Mounting hardware is included for a straightforward install.
Steel construction. With a dust boot and ball joint assembly for added protection.
Cross-references Beck/Arnley 101-5042, Mevotech Supreme MS10505 and MOOG Chassis Products K80700 for the same application. See all 17.
Delphi TC1192 Front Lower Ball Joint
Delphi TC1192 is a standard replacement suspension ball joint for front lower applications on select Volvo models. Built with a steel body, dust boot, and bolt-on mounting design, it is engineered for OE-style fitment and consistent steering and suspension performance.
- Front lower suspension ball joint for select Volvo applications
- Steel construction with black finish
- Dust boot included; chloroprene rubber (CR) boot material
- Bolt-on mounting type with mounting hardware included
- Standard replacement, non-adjustable, non-greaseable design
- 12 mm stud thread diameter with threaded stud type
Fitment Details
- Fits 2007 Volvo S60, front lower, to chassis # 626501
- Fits 2001-2007 Volvo V70, front lower, with 12mm threads
- Fits 2003-2007 Volvo XC70, front lower
- Fits 2001-2006 Volvo S60, front lower
- Fits 1999-2006 Volvo S80, front lower, with 12mm threads
Product Overview
Delphi TC1192 is built for front lower suspension service where precise joint movement and secure mounting matter. The assembly measures 97.0 mm wide and 97.0 mm high, with a 75.0 mm distance between mounting holes, a 15.0 mm wrench size, and a 10.0 mm mounting bolt diameter. Delphi applies OE-level dimensional and material analysis to help match the original part geometry, and the component is tested for extreme temperature exposure and salt-spray resistance to support durability in demanding road conditions. This part cross-references MOOG Chassis Products K80700 for the same application.
Common Repair Uses
- Front-end clunking or looseness from worn ball joint wear
- Uneven tire wear caused by suspension play
- Steering wander or reduced road feel
- Inspection failure due to excessive front suspension movement
- Restoring stable alignment geometry on Volvo S60, V70, XC70, and S80 models
Installation Notes
Verify the vehicle’s chassis break, thread size, and mounting-hole spacing before installation. This Delphi TC1192 assembly uses a bolt-on design and includes mounting bolts and nuts, while the dust boot is already fitted. Because it is a non-greaseable, standard replacement joint, confirm the original suspension configuration and torque fasteners to the vehicle manufacturer’s specifications during service.
Quality Assurance
Delphi uses OE-focused engineering for its steering and suspension portfolio, with parts evaluated for temperature extremes and extended salt-spray exposure. That testing approach supports consistent fit and long-term corrosion resistance in everyday driving conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2007 | Volvo | S60 | Front Lower | To Chassis # 626501 |
| 2007 | Volvo | V70 | Front Lower | with 12mm Threads |
| 2007 | Volvo | XC70 | Front Lower | — |
| 2006 | Volvo | S60 | Front Lower | — |
| 2006 | Volvo | S80 | Front Lower | with 12mm Threads |
| 2006 | Volvo | V70 | Front Lower | with 12mm Threads |
| 2006 | Volvo | XC70 | Front Lower | — |
| 2005 | Volvo | S60 | Front Lower | — |
| 2005 | Volvo | S80 | Front Lower | with 12mm Threads |
| 2005 | Volvo | V70 | Front Lower | with 12mm Threads |
| 2005 | Volvo | XC70 | Front Lower | — |
| 2004 | Volvo | S60 | Front Lower | — |
| 2004 | Volvo | S80 | Front Lower | with 12mm Threads |
| 2004 | Volvo | V70 | Front Lower | with 12mm Threads |
| 2004 | Volvo | XC70 | Front Lower | — |
| 2003 | Volvo | S60 | Front Lower | — |
| 2003 | Volvo | S80 | Front Lower | with 12mm Threads |
| 2003 | Volvo | V70 | Front Lower | with 12mm Threads |
| 2003 | Volvo | XC70 | Front Lower | — |
| 2002 | Volvo | S60 | Front Lower | — |
| 2002 | Volvo | S80 | Front Lower | with 12mm Threads |
| 2002 | Volvo | V70 | Front Lower | with 12mm Threads |
| 2001 | Volvo | S60 | Front Lower | — |
| 2001 | Volvo | S80 | Front Lower | with 12mm Threads |
| 2001 | Volvo | V70 | Front Lower | with 12mm Threads |
| 2000 | Volvo | S80 | Front Lower | with 12mm Threads |
| 1999 | Volvo | S80 | Front Lower | with 12mm Threads |
| No rows match your filter. | ||||