/live/media/DE/DE_TC1275_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC1275 Suspension Stabilizer Bar Link - Front
| Brand | Delphi TC1275 |
|---|---|
| Position | Front |
| Bearing Material | Polyoxymethilen (POM) |
| Bolt Length | 4.764 |
| Bolt Length | 121.0 |
| Bolt Thread Diameter | 0.39 |
| Bolt Thread Diameter | 10.0 |
| Bolt Thread Size | M10 x 1.50 |
| Bolts Included | No |
| Bushing Color | Black |
| Bushing Material | Rubber |
| Bushings Included | No |
| Dust Boot Included | Yes |
| End 1 Type | Ball Joint |
| End 2 Type | Ball Joint |
| Grade Type | Regular |
| Greaseable | No |
| Height | 2.598 |
| Height | 66.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 4.764 |
| Length | 121.0 |
| Locking Nuts Included | Yes |
| Material | Steel |
| Washers Included | No |
| Weight | 0.69 |
| Width | 1.575 |
| Width | 40.0 |
| Fits | Smart · 3 vehicles |
Standard replacement. Built for OE-level compatibility and a straightforward aftermarket fit.
Steel construction. Durable housing with a dust boot and rubber bushings.
Ball joint ends. Helps restore stable suspension link performance.
Cross-references Beck/Arnley 101-5608, Mevotech Supreme MS10845 and 000 5102V004000000 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Front Stabilizer Bar Link for Smart Fortwo
Restore front suspension control with this Delphi suspension stabilizer bar link, part number TC1275. It is a standard replacement for the front position on 2005-2007 Smart Fortwo models and is built with OE-focused dimensional and material analysis for proper fitment.
- Fits 2005-2007 Smart Fortwo, front
- Delphi part number TC1275
- Steel construction with steel housing
- Ball joint ends on both sides
- Dust boot included
- Black rubber bushing material
- Locking nuts included
- Standard replacement grade
- Greaseable: No
Product Details
The Delphi TC1275 stabilizer bar link is engineered for the front suspension of the 2005-2007 Smart Fortwo. Delphi applies OE-level testing and material analysis to help ensure dimensional accuracy and consistent performance in aftermarket service. This front sway bar link uses ball joint ends, a steel body, and a dust boot to support stable suspension movement and reliable bar connection. If you are replacing a worn front stabilizer link on a Smart Fortwo, TC1275 provides a direct-fit service part for the listed application.
This part cross-references Beck/Arnley 101-5608 for the same application.
Common Replacement Symptoms
- Front end clunking or rattling over bumps
- Excessive sway bar movement at the front suspension
- Loose or imprecise steering feel
- Visible wear at the ball joint ends or dust boot
- Uneven suspension response during cornering
Installation Notes
Verify front-position fitment before installation on your Smart Fortwo. Inspect the sway bar, mounting points, and adjacent suspension components for wear before replacing the link. Torque fasteners to the vehicle manufacturer’s specifications and confirm that the link seats correctly at both ball joint ends.
Quality Assurance
Delphi tests steering and suspension components to OE performance standards, including temperature exposure below -40 degrees C and above 120 degrees C, plus extended salt-spray testing for corrosion resistance. The brand also uses dimensional and material analysis to support OE-to-aftermarket compatibility. Delphi TC1275 is a standard replacement suspension stabilizer bar link for the front of 2005-2007 Smart Fortwo.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2007 | Smart | Fortwo | Front | — |
| 2006 | Smart | Fortwo | Front | — |
| 2005 | Smart | Fortwo | Front | — |
| No rows match your filter. | ||||