/live/media/DE/DE_TC134_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC134 Suspension Ball Joint - Front Lower
| Brand | Delphi TC134 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 0 |
| Bushings Included | No |
| Castle Nut Included | No |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 2.52 |
| Height | 64.0 |
| Item Grade | Standard Replacement |
| Length | 118 |
| Material | Steel |
| Maximum Outside Diameter | 2.559 |
| Maximum Outside Diameter | 65.0 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Pressed |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.882 |
| Stud Tapered End 1 Diameter | 22.4 |
| Stud Tapered End 2 Diameter | 0.787 |
| Stud Tapered End 2 Diameter | 20.0 |
| Stud Thread Length | 1.004 |
| Stud Thread Length | 25.5 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Type | Premium |
| Washers Included | No |
| Width | 65.0 |
| Fits | Volkswagen |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the aftermarket part.
Steel construction. Built with a dust boot and pressed, threaded stud assembly for dependable service.
Mounting hardware included. Nuts are included for a more complete installation.
Cross-references Beck/Arnley 101-3378, Beck/Arnley 101-5604 and Mevotech Supreme MK6457 for the same application. See all 9.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC134 Front Lower Ball Joint
Delphi TC134 is a premium suspension ball joint built as a standard replacement for front lower applications. It combines a steel body, pressed mounting design, and a dust boot to support precise steering and suspension movement in demanding daily driving conditions.
For shoppers searching for a front lower ball joint for Mercedes-Benz E-Class applications, Delphi TC134 offers OE-focused dimensional and material analysis for better part-to-vehicle compatibility. This part cross-references Beck/Arnley 101-3378 for the same application.
Key Features
- Part number: TC134
- Front lower suspension ball joint
- Steel construction
- Pressed mounting type
- Ball joint assembly included
- Dust boot included
- Mounting hardware included
- Nuts included
- Standard replacement, premium type
- Threaded tapered stud with 1.5 pitch
- Grease fitting not included; non-greaseable design
- Adjustable: No
Detailed Description
Delphi TC134 is engineered for front lower suspension service where accurate joint articulation and stable steering response matter. The steel housing, tapered threaded stud, and chloroprene rubber dust boot support consistent operation while helping protect the joint from road contamination. Delphi validates its OE-style steering and suspension parts through extreme temperature exposure and salt-spray testing, along with dimensional and material analysis to improve fit and compatibility.
For Mercedes-Benz E-Class owners and technicians looking for a front lower ball joint replacement, TC134 provides a direct-service solution for worn or noisy suspension joints. The pressed-in design is suited to applications that require a secure chassis fit and precise suspension geometry.
What It Helps Fix
- Front suspension clunking or popping over bumps
- Excessive play in the lower ball joint
- Loose or imprecise steering feel
- Uneven tire wear caused by suspension wear
- Inspection failures related to worn front suspension components
Installation Notes and Tips
TC134 uses a pressed mounting style, so proper removal and installation tools are required. Inspect the control arm and surrounding hardware before installation, and verify the tapered stud and thread pitch match the vehicle specification. After installation, a professional alignment is recommended to restore correct suspension geometry. Confirm fitment against the vehicle’s exact year, model, and front lower suspension configuration before ordering.
Quality Assurance
Delphi applies OE-focused engineering to its aftermarket steering and suspension portfolio, with testing that includes extreme temperature exposure and extended salt-spray resistance. The brand also uses dimensional and material analysis to support OE-style fit and performance for applications such as Mercedes-Benz E-Class front lower suspension service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||