/live/media/DE/DE_TC1369_Ang.jpg)
Delphi TC1369 Suspension Ball Joint - Front Lower
| Brand | Delphi TC1369 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 0 |
| Bushings Included | No |
| Castle Nut Included | No |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 2.205 |
| Height | 56.0 |
| Item Grade | Standard Replacement |
| Length | 106 |
| Material | Steel |
| Maximum Outside Diameter | 2.205 |
| Maximum Outside Diameter | 56.0 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Pressed |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.799 |
| Stud Tapered End 1 Diameter | 20.3 |
| Stud Tapered End 2 Diameter | 0.642 |
| Stud Tapered End 2 Diameter | 16.3 |
| Stud Thread Length | 0.925 |
| Stud Thread Length | 23.5 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Type | Premium |
| Washers Included | No |
| Width | 56.0 |
| Fits | Mercedes-Benz · 21 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Steel construction. Built with a dust boot and pressed mounting for dependable service.
Hardware included. Mounting hardware and nuts are included for easier installation.
Cross-references Beck/Arnley 101-5568, Mevotech Supreme MS10502 and MOOG Chassis Products K500005 for the same application. See all 13.
Front Lower Ball Joint for Mercedes-Benz ML-Class
Delphi TC1369 is a premium suspension ball joint for the front lower position on select Mercedes-Benz ML-Class applications. It is built as a standard replacement with a pressed mounting type, steel construction, and a protective dust boot to support consistent steering and suspension movement.
Fits 1998-2003 Mercedes-Benz ML320, front lower. Fits 1999-2001 Mercedes-Benz ML430, front lower. Fits 2000-2003 Mercedes-Benz ML55 AMG, front lower. Fits 2002-2005 Mercedes-Benz ML500, front lower. Fits 2003-2005 Mercedes-Benz ML350, front lower. Fits 2010 Mercedes-Benz ML350, front lower.
- Delphi part number TC1369
- Front lower suspension ball joint assembly
- Steel construction with a chloroprene rubber dust boot
- Pressed-in mounting type for OE-style suspension service
- Standard replacement grade for select Mercedes-Benz ML320, ML430, ML55 AMG, ML500, and ML350 models
- Includes mounting hardware and nuts
- Non-greaseable, sealed design
- Tapered threaded stud with 1.5 thread pitch
Detailed Product Information
Delphi TC1369 is engineered for the front lower suspension position on select Mercedes-Benz ML-Class vehicles, including the ML320, ML430, ML55 AMG, ML500, and ML350. Delphi applies OE-focused dimensional and material analysis to help ensure proper fit between the original and replacement part. The ball joint is tested across extreme temperature ranges and exposed to extended salt spray conditions to evaluate durability in demanding road environments. This part cross-references MOOG Chassis Products K500005 for the same application.
Common Repair Applications
- Clunking or knocking from the front lower suspension
- Excessive play in the steering or front end
- Uneven tire wear related to worn suspension joints
- Loose or imprecise front suspension response
- Replacement of a worn pressed-in ball joint on Mercedes-Benz ML-Class models
Installation Notes and Tips
This is a pressed ball joint assembly, so installation typically requires proper suspension service tools and a suitable press. Confirm the front lower position and verify stud taper, thread pitch, and mounting dimensions before installation. Because this part is non-greaseable and includes a dust boot, inspect the surrounding control arm and related hardware for wear during service.
Quality Assurance
Delphi uses OE-oriented testing and material validation for its steering and suspension components, including temperature cycling and salt spray exposure, to support durability and fit consistency. The TC1369 is built as a standard replacement part for the listed Mercedes-Benz ML-Class applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Mercedes-Benz | ML350 | Front Lower | — |
| 2005 | Mercedes-Benz | ML350 | Front Lower | — |
| 2005 | Mercedes-Benz | ML500 | Front Lower | — |
| 2004 | Mercedes-Benz | ML350 | Front Lower | — |
| 2004 | Mercedes-Benz | ML500 | Front Lower | — |
| 2003 | Mercedes-Benz | ML320 | Front Lower | — |
| 2003 | Mercedes-Benz | ML350 | Front Lower | — |
| 2003 | Mercedes-Benz | ML500 | Front Lower | — |
| 2003 | Mercedes-Benz | ML55 AMG | Front Lower | — |
| 2002 | Mercedes-Benz | ML320 | Front Lower | — |
| 2002 | Mercedes-Benz | ML500 | Front Lower | — |
| 2002 | Mercedes-Benz | ML55 AMG | Front Lower | — |
| 2001 | Mercedes-Benz | ML320 | Front Lower | — |
| 2001 | Mercedes-Benz | ML430 | Front Lower | — |
| 2001 | Mercedes-Benz | ML55 AMG | Front Lower | — |
| 2000 | Mercedes-Benz | ML320 | Front Lower | — |
| 2000 | Mercedes-Benz | ML430 | Front Lower | — |
| 2000 | Mercedes-Benz | ML55 AMG | Front Lower | — |
| 1999 | Mercedes-Benz | ML320 | Front Lower | — |
| 1999 | Mercedes-Benz | ML430 | Front Lower | — |
| 1998 | Mercedes-Benz | ML320 | Front Lower | — |
| No rows match your filter. | ||||