/live/media/DE/DE_TC1397_Ang.jpg)
Delphi TC1397 Suspension Stabilizer Bar Link - Front
| Brand | Delphi TC1397 |
|---|---|
| Position | Front |
| Bearing Material | Polyoxymethilen (POM) |
| Bolt Length | 7.48 |
| Bolt Length | 190.0 |
| Bolt Thread Diameter | 0.39 |
| Bolt Thread Diameter | 10.0 |
| Bolt Thread Size | M10 x 1.25 |
| Bolts Included | No |
| Bushing Color | Black |
| Bushing Material | Rubber |
| Bushings Included | No |
| Dust Boot Included | Yes |
| End 1 Type | Ball Joint |
| End 2 Type | Ball Joint |
| Grade Type | Regular |
| Greaseable | No |
| Height | 3.465 |
| Height | 88.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 7.48 |
| Length | 190.0 |
| Locking Nuts Included | Yes |
| Material | Steel |
| Washers Included | No |
| Weight | 0.49 |
| Width | 1.339 |
| Width | 34.0 |
| Fits | Mazda · 2 vehicles |
Standard replacement. OE expertise helps ensure compatibility with the aftermarket part.
Steel construction. Built with a steel housing and rubber bushings for dependable service.
Ball joint ends. Designed with ball joints at both ends and a dust boot included.
Cross-references Beck/Arnley 101-5002, Mevotech Supreme MK80685 and MOOG Chassis Products K80685 for the same application. See all 9.
Front Stabilizer Bar Link for Mazda Protege
Restore front suspension control with this Delphi stabilizer bar link, part number TC1397. It is a direct-fit replacement for select 1999-2000 Mazda Protege models and is built with OE-focused dimensional and material analysis for proper compatibility.
- Fits 1999-2000 Mazda Protege, front
- Delphi TC1397 suspension stabilizer bar link
- Steel housing and steel construction
- Ball joint ends on both sides
- Dust boot included for added joint protection
- Black bushing color with rubber bushing material
- Polyoxymethylene (POM) bearing material
- Locking nuts included
- Standard replacement grade
- Front position application
OE-Style Construction
Delphi TC1397 is engineered as a standard replacement stabilizer link for the front suspension. It uses steel construction, ball joint ends, and a protected joint design to support consistent sway bar connection and steering response on the Mazda Protege. Delphi applies OE-level testing to temperature extremes and salt spray exposure, helping validate durability in demanding road conditions.
This part cross-references MOOG Chassis Products K80685 for the same application.
Common Repair Symptoms
- Front end clunking or rattling over bumps
- Loose or delayed steering feel
- Excessive sway bar movement
- Uneven suspension noise from the front of the vehicle
- Worn or damaged stabilizer link joints
Installation Notes
Install on the front suspension only. Verify bolt thread size M10 x 1.25 and confirm the replacement matches the original link length and end style before installation. Because this is a ball-joint style stabilizer link, proper torque and alignment checks after service are recommended.
Quality Assurance
Delphi uses OE-based dimensional and material analysis to support fitment accuracy and performance. The part is tested for temperature resistance below -40 degrees C and above 120 degrees C, and it is exposed to 720 hours of salt spray during validation.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2000 | Mazda | Protege | Front | — |
| 1999 | Mazda | Protege | Front | — |
| No rows match your filter. | ||||