/live/media/DE/DE_TC1651_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC1651 Suspension Ball Joint - Front Lower
| Brand | Delphi TC1651 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Gray |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Distance Between Mounting Holes | 27.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | Yes |
| Greaseable | Yes |
| Height | 4.264 |
| Height | 108.3 |
| Item Grade | Standard Replacement |
| Material | Steel |
| Maximum Outside Diameter | 2.11 |
| Maximum Outside Diameter | 53.6 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter | 0.709 |
| Mounting Bolt Head Diameter | 18.0 |
| Mounting Bolt Length | 1.634 |
| Mounting Bolt Length | 41.5 |
| Mounting Bolt Shank Diameter | 0.394 |
| Mounting Bolt Shank Diameter | 10.0 |
| Mounting Bolt Thread Diameter | 10.0 |
| Mounting Bolt Thread Length | 1.378 |
| Mounting Bolt Thread Length | 35.0 |
| Mounting Bolt Thread Pitch | 1.25 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 4 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.701 |
| Stud Tapered End 1 Diameter | 17.8 |
| Stud Tapered End 2 Diameter | 0.843 |
| Stud Tapered End 2 Diameter | 21.4 |
| Stud Thread Diameter | 0.63 |
| Stud Thread Diameter | 16.0 |
| Stud Thread Length | 0.85 |
| Stud Thread Length | 21.6 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 81.0 |
| Wrench Size | 0.669 |
| Wrench Size | 17.0 |
| Fits | Dodge · 13 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the original part.
Steel construction. Built with a dust boot and greaseable design for dependable suspension service.
Bolt-on installation. Mounting hardware, nuts, cotter pin, and grease fitting are included.
Cross-references Baldwin B7241, Dorman - OE Solutions 520-349 and Dorman - OE Solutions 520-350 for the same application. See all 19.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC1651 Front Lower Ball Joint
Delphi TC1651 is a standard replacement suspension ball joint built for front lower applications on select Dodge trucks and SUVs. It combines a steel body, greaseable design, and included dust boot to support dependable steering and suspension service on the road.
Key Features
- Steel construction with gray finish
- Standard replacement suspension grade
- Greaseable design with grease fitting included
- Dust boot included with chloroprene rubber (CR) material
- Ball joint assembly with tapered stud
- Castle nut, cotter pin, mounting hardware, and mounting bolts included
- Bolt-on mounting type with 4 mounting holes
Detailed Description
Delphi TC1651 is engineered as a front lower suspension ball joint for 1997-2004 Dodge Dakota and 1999-2003 Dodge Durango applications. Delphi applies OE-focused dimensional and material analysis to help ensure proper fit and consistent aftermarket replacement performance. The part is built with a threaded, tapered stud, a greaseable service design, and a protective dust boot to help maintain joint integrity in demanding suspension use. This Delphi TC1651 ball joint is a direct replacement choice for drivers servicing Dodge Dakota and Dodge Durango front lower suspension wear.
This part cross-references MOOG Chassis Products K7241 for the same application.
What It Helps Address
- Front-end looseness or play from a worn lower ball joint
- Clunking or popping noises during steering or suspension movement
- Uneven tire wear related to suspension joint wear
- Steering instability caused by excess joint movement
- Inspection failure tied to worn front lower suspension components
Installation Notes and Tips
Fits 1997-2004 Dodge Dakota, Front Lower. Fits 1999-2003 Dodge Durango, Front Lower. Verify the tapered stud, mounting pattern, and thread specifications before installation. Because this is a bolt-on design with included mounting bolts and related hardware, confirm the existing knuckle and control arm configuration match the OE-style application before service. Proper torque and alignment checks are recommended after replacement.
Quality Assurance
Delphi tests steering and suspension components across extreme temperature and corrosion conditions, including subzero cold, high heat, and extended salt-spray exposure. That OE-focused validation supports consistent material quality and fitment for replacement service on Dodge Dakota and Dodge Durango front lower suspension applications.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2004 | Dodge | Dakota | RWD | Front Lower | — |
| 2003 | Dodge | Dakota | RWD | Front Lower | — |
| 2003 | Dodge | Durango | RWD | Front Lower | — |
| 2002 | Dodge | Dakota | RWD | Front Lower | — |
| 2002 | Dodge | Durango | RWD | Front Lower | — |
| 2001 | Dodge | Dakota | RWD | Front Lower | — |
| 2001 | Dodge | Durango | RWD | Front Lower | — |
| 2000 | Dodge | Dakota | RWD | Front Lower | — |
| 2000 | Dodge | Durango | RWD | Front Lower | — |
| 1999 | Dodge | Dakota | RWD | Front Lower | — |
| 1999 | Dodge | Durango | RWD | Front Lower | — |
| 1998 | Dodge | Dakota | RWD | Front Lower | — |
| 1997 | Dodge | Dakota | RWD | Front Lower | — |
| No rows match your filter. | |||||