/live/media/DE/DE_TC1653_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC1653 Suspension Ball Joint - Front Upper
| Brand | Delphi TC1653 |
|---|---|
| Position | Front Upper |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Gray |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Dust Boot Included | Yes |
| Dust Boot Material | Sponge |
| Grease Fitting Included | Yes |
| Greaseable | Yes |
| Height | 4.441 |
| Height | 112.8 |
| Item Grade | Standard Replacement |
| Length | 56 |
| Material | Steel |
| Maximum Outside Diameter | 2.205 |
| Maximum Outside Diameter | 56.0 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Pressed |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.715 |
| Stud Tapered End 1 Diameter | 18.15 |
| Stud Tapered End 2 Diameter | 0.858 |
| Stud Tapered End 2 Diameter | 21.8 |
| Stud Thread Diameter | 0.63 |
| Stud Thread Diameter | 16.0 |
| Stud Thread Length | 0.992 |
| Stud Thread Length | 25.2 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 56.0 |
| Fits | Dodge · 9 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Steel construction. Built with a gray finish, grease fitting, and dust boot.
Complete assembly. Includes mounting hardware, castle nut, cotter pin, and nuts.
Cross-references Dorman - Premium B7394PR, Mevotech Supreme MK7394 and MOOG Chassis Products K7394 for the same application. See all 9.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC1653 Front Upper Ball Joint
Delphi TC1653 is a standard replacement suspension ball joint for the front upper position on select Dodge Ram heavy-duty trucks. Built with a steel body, greaseable design, and included dust boot, it is made for direct service on applications that require a pressed-in front upper ball joint.
Key Features
- Front upper suspension ball joint for select Dodge Ram 2500 and Ram 3500 models
- Steel construction with gray finish
- Pressed mounting type for OE-style suspension service
- Grease fitting included for serviceable lubrication
- Dust boot included to help protect the joint
- Castle nut, cotter pin, nuts, and mounting hardware included
- Standard replacement, non-adjustable design
- Tapered threaded stud with cotter pin hole
Detailed Description
Delphi TC1653 is engineered for the front upper suspension location and is listed for 2000-2002 Dodge Ram 2500 and 2000-2002 Dodge Ram 3500 applications, including Ram 3500 models with a solid front axle and non-adjustable type notes where specified. Delphi applies OE-focused dimensional and material analysis to help ensure proper part-to-part compatibility, and this ball joint is tested for demanding temperature and corrosion exposure conditions. If you are replacing a worn front upper ball joint on a Dodge Ram 2500 or Dodge Ram 3500, TC1653 provides a direct-service suspension component built around OE-style fit and function.
This part cross-references MOOG Chassis Products K7394 for the same application.
Common Repair Symptoms
- Front-end clunking or popping over bumps
- Excessive play in the upper suspension joint
- Uneven tire wear caused by suspension looseness
- Steering wander or imprecise road feel
- Inspection failure due to worn ball joint movement
Installation Notes
Fits 2000-2002 Dodge Ram 2500, Front Upper. Fits 2000-2002 Dodge Ram 3500, Front Upper. Verify the pressed-in mounting style, stud taper, and front upper position before installation. Because this is a suspension ball joint service part, proper press tools and alignment checks are recommended after replacement.
Quality Assurance
Delphi uses OE-based engineering and validation methods for its steering and suspension portfolio. This ball joint is exposed to extreme temperature testing and extended salt-spray corrosion testing to support durability in demanding service conditions.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2002 | Dodge | Ram 2500 | 4WD | Front Upper | Non-Adjustable Type |
| 2002 | Dodge | Ram 3500 | RWD | Front Upper | Non-Adjustable Type; with Solid Front Axle |
| 2002 | Dodge | Ram 3500 | 4WD | Front Upper | with Solid Front Axle |
| 2001 | Dodge | Ram 2500 | 4WD | Front Upper | Non-Adjustable Type |
| 2001 | Dodge | Ram 3500 | RWD | Front Upper | Non-Adjustable Type; with Solid Front Axle |
| 2001 | Dodge | Ram 3500 | 4WD | Front Upper | with Solid Front Axle |
| 2000 | Dodge | Ram 2500 | 4WD | Front Upper | Non-Adjustable Type |
| 2000 | Dodge | Ram 3500 | RWD | Front Upper | Non-Adjustable Type; with Solid Front Axle |
| 2000 | Dodge | Ram 3500 | 4WD | Front Upper | with Solid Front Axle |
| No rows match your filter. | |||||