/live/media/DE/DE_TC1793_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC1793 Suspension Ball Joint - Front Left Lower
| Brand | Delphi TC1793 |
|---|---|
| Position | Front Left Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Gray |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Distance Between Mounting Holes | 63.5 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 5.866 |
| Height | 149.0 |
| Item Grade | Standard Replacement |
| Length | 240 |
| Material | Steel |
| Maximum Outside Diameter | 2.24 |
| Maximum Outside Diameter | 56.9 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 5 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.689 |
| Stud Tapered End 1 Diameter | 17.5 |
| Stud Tapered End 2 Diameter | 0.787 |
| Stud Tapered End 2 Diameter | 20.0 |
| Stud Thread Diameter | 0.63 |
| Stud Thread Diameter | 16.0 |
| Stud Thread Length | 0.886 |
| Stud Thread Length | 22.5 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 78.0 |
| Wrench Size | 0.945 |
| Wrench Size | 24.0 |
| Fits | Toyota · 12 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility with the aftermarket part.
Steel construction. Built with a dust boot and chloroprene rubber for added protection.
Bolt-on installation. Includes mounting hardware, nuts, cotter pin, and castle nut.
Cross-references Beck/Arnley 101-4815, MAS Industries BJ75023 and Mevotech Supreme MK90262 for the same application. See all 14.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC1793 Front Left Lower Ball Joint
Delphi TC1793 is a standard replacement suspension ball joint for the front left lower position. It is built with a steel body, a threaded tapered stud, and a dust boot to support consistent steering and suspension movement on select Toyota applications.
Key Features
- Direct-fit suspension ball joint for the front left lower position
- Steel construction with gray finish
- Ball joint assembly with dust boot included
- Castle nut, cotter pin, nuts, and mounting hardware included
- Bolt-on mounting type with 5 mounting holes
- Non-greaseable, standard suspension grade design
- Threaded tapered stud with 1.5 pitch and 24 mm wrench size
Detailed Description
Delphi TC1793 is engineered as a standard replacement ball joint for Toyota suspension service, including 1996-2002 Toyota 4Runner front left lower, 2001-2002 Toyota Sequoia front left lower, and 2000-2002 Toyota Tundra front left lower applications. It also cross-references MOOG Chassis Products K90262 and Beck/Arnley 101-4815 for the same application. Delphi applies OE-level dimensional and material analysis to help maintain proper fit between the replacement part and the original suspension geometry. The assembly uses a steel housing, chloroprene rubber dust boot, tapered stud, and bolt-on mounting layout to support front suspension articulation and steering response.
Common Repair Applications
- Front-end clunking or looseness from worn ball joint wear
- Uneven tire wear related to suspension joint play
- Steering wander or reduced directional stability
- Inspection failure caused by excessive front lower joint movement
- Restoration of proper suspension articulation on Toyota 4Runner, Sequoia, or Tundra
Installation Notes and Tips
Verify the vehicle position before installation: Fits 1996-2002 Toyota 4Runner, front left lower; Fits 2001-2002 Toyota Sequoia, front left lower; Fits 2000-2002 Toyota Tundra, front left lower. Confirm stud taper, mounting-hole spacing, and thread specifications against the original part before pressing or bolting in place. After installation, perform a front-end alignment and inspect adjacent suspension components for wear.
Quality Assurance
Delphi tests steering and suspension components across extreme temperature and corrosion conditions, including sub-zero cold, high heat, and extended salt-spray exposure. That OE-focused validation supports consistent fit and durability for Toyota 4Runner, Sequoia, and Tundra service applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2002 | Toyota | 4Runner | Front Left Lower | — |
| 2002 | Toyota | Sequoia | Front Left Lower | To 08/2002 |
| 2002 | Toyota | Tundra | Front Left Lower | To 08/2002 |
| 2001 | Toyota | 4Runner | Front Left Lower | — |
| 2001 | Toyota | Sequoia | Front Left Lower | — |
| 2001 | Toyota | Tundra | Front Left Lower | — |
| 2000 | Toyota | 4Runner | Front Left Lower | — |
| 2000 | Toyota | Tundra | Front Left Lower | — |
| 1999 | Toyota | 4Runner | Front Left Lower | — |
| 1998 | Toyota | 4Runner | Front Left Lower | — |
| 1997 | Toyota | 4Runner | Front Left Lower | — |
| 1996 | Toyota | 4Runner | Front Left Lower | — |
| No rows match your filter. | ||||