/live/media/DE/DE_TC1797_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC1797 Suspension Stabilizer Bar Link - Front
| Brand | Delphi TC1797 |
|---|---|
| Position | Front |
| Bearing Material | Polyoxymethilen (POM) |
| Bolt Length | 5.394 |
| Bolt Length | 137.0 |
| Bolt Thread Diameter | 0.39 |
| Bolt Thread Diameter | 10.0 |
| Bolt Thread Size | M10 x 1.50 |
| Bolts Included | No |
| Bushing Color | Black |
| Bushing Material | Rubber |
| Bushings Included | No |
| Dust Boot Included | Yes |
| End 1 Type | Ball Joint |
| End 2 Type | Ball Joint |
| Grade Type | Regular |
| Greaseable | No |
| Height | 5.354 |
| Height | 136.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 5.394 |
| Length | 137.0 |
| Locking Nuts Included | Yes |
| Material | Steel |
| Washers Included | No |
| Weight | 0.63 |
| Width | 1.26 |
| Width | 32.0 |
| Fits | Jaguar · 3 vehicles |
Standard replacement. Built as a direct-fit suspension stabilizer bar link.
Steel construction. Includes a dust boot and rubber bushings for added protection.
OE expertise. Delphi applies dimensional and material analysis for compatibility.
Cross-references Beck/Arnley 101-5703, Mevotech Supreme MK80261 and MOOG Chassis Products K80261 for the same application. See all 11.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC1797 Front Stabilizer Bar Link
Delphi TC1797 is a front suspension stabilizer bar link built for OE-style replacement on the 2000-2002 Jaguar S-Type. It uses steel construction, ball joint ends, and a dust boot to support consistent sway bar connection and steering response in everyday driving.
Key Features
- Front suspension stabilizer bar link for the Jaguar S-Type
- Steel housing and steel construction for durable service
- Ball joint ends on both sides for suspension articulation
- Dust boot included to help protect the joint area
- Black rubber bushing material with POM bearing material
- Standard replacement part number TC1797
- Locking nuts included; bolts, washers, and bushings are not included
Detailed Description
Delphi TC1797 is a front stabilizer bar link engineered as a standard replacement for the 2000-2002 Jaguar S-Type, front. Delphi applies OE-focused dimensional and material analysis to help match the original part’s fit and function, and the component is tested for temperature extremes and salt-spray exposure to support long-term durability. The M10 x 1.50 thread size, 137.0 mm length, and ball joint design make this an OE-style suspension link for restoring proper sway bar connection on the Jaguar S-Type. This part cross-references MOOG Chassis Products K80261 and Mevotech Supreme MK80261 for the same application.
Common Problems This Part Can Address
- Front end clunking or rattling from a worn stabilizer link
- Excessive sway bar play during cornering
- Loose or inconsistent steering feel over bumps
- Noise caused by deteriorated ball joints or bushings
- Uneven suspension response at the front axle
Installation Notes and Tips
Verify front position and thread size before installation on the Jaguar S-Type. Inspect the sway bar, mounting points, and adjacent suspension components for wear before replacing the link. Because bolts and washers are not included, reuse or source the correct fasteners as needed for the vehicle application. Torque all fasteners to factory specifications after installation.
Quality Assurance
Delphi uses OE-based engineering and material validation for its aftermarket steering and suspension components. TC1797 is built to standard replacement specifications and is tested under extreme temperature and corrosion conditions to support dependable service on the 2000-2002 Jaguar S-Type, front.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2002 | Jaguar | S-Type | Front | — |
| 2001 | Jaguar | S-Type | Front | — |
| 2000 | Jaguar | S-Type | Front | — |
| No rows match your filter. | ||||