/live/media/DE/DE_TC1852_Fro.jpg)
Delphi TC1852 Suspension Ball Joint - Front Lower
| Brand | Delphi TC1852 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Gray |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | Yes |
| Greaseable | Yes |
| Height | 4.803 |
| Item Grade | Standard Replacement |
| Length | 122 |
| Material | Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040 |
| Maximum Outside Diameter | 2.244 |
| Maximum Outside Diameter | 57.0 |
| Mount Plate Included | No |
| Mounting Bolts Included | No |
| Mounting Hardware Included | Yes |
| Mounting Type | Press In |
| Nuts Included | Yes |
| Stud Taper Per Foot | 0.167 |
| Stud Tapered End 1 Diameter | 0.953 |
| Stud Tapered End 1 Diameter | 24.2 |
| Stud Tapered End 2 Diameter | 0.748 |
| Stud Tapered End 2 Diameter | 19.0 |
| Stud Thread Diameter | 16.0 |
| Stud Thread Length | 1.161 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | Yes |
| Width | 57.0 |
| Fits | Dodge · 6 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Press-in design. Includes mounting hardware for a straightforward installation.
Greaseable assembly. Built with alloy steel ball and carbon steel housing.
Cross-references Dorman - OE Solutions 520-329, Dorman - OE Solutions 520-330 and Dorman - Premium BJ82305XL for the same application. See all 25.
Delphi TC1852 Front Lower Ball Joint
Delphi TC1852 is a front lower suspension ball joint built for OE-style replacement performance on the 1994-1999 Dodge Ram 1500. It combines a press-in mounting design with a greaseable, tapered stud layout for serviceable front suspension repair.
Key Features
- Fits 1994-1999 Dodge Ram 1500, front lower
- OE-focused aftermarket steering and suspension replacement from Delphi
- Press-in mounting type for the front lower position
- Greaseable design with grease fitting included
- Dust boot included for joint protection
- Castle nut, cotter pin, nuts, washers, and mounting hardware included
- Ball material: alloy steel SAE 5140; housing material: carbon steel SAE 1040
- Standard replacement grade, non-adjustable
- Part number: TC1852
Detailed Description
Delphi TC1852 is engineered as a front lower suspension ball joint for Dodge Ram 1500 trucks from 1994 through 1999. Delphi applies OE-level dimensional and material analysis to help ensure proper fit and consistent suspension geometry, while the joint is tested across extreme temperature ranges and salt-spray exposure to support durability in demanding road conditions. The tapered, threaded stud design, chloroprene rubber dust boot, and greaseable construction support routine suspension service on the Ram 1500 front end. If you are replacing worn steering and suspension components on a 1994-1999 Dodge Ram 1500, Delphi TC1852 provides a direct front lower ball joint solution. This part cross-references MOOG Chassis Products K7201 for the same application.
Common Repair Symptoms
- Front-end clunking or popping over bumps
- Excessive play in the lower suspension joint
- Uneven tire wear caused by worn front suspension parts
- Loose or wandering steering feel
- Visible boot damage or grease loss at the joint
Installation Notes and Tips
Fits 1994-1999 Dodge Ram 1500, front lower. This is a press-in ball joint, so proper removal and installation tools are required for service. Inspect the control arm, adjacent bushings, and related steering components before installation, and verify the tapered stud, cotter pin hole, and supplied hardware are seated correctly during assembly. After installation, perform a front-end alignment.
Quality Assurance
Delphi uses OE-based engineering, dimensional checks, and material analysis to support fit and function in aftermarket steering and suspension parts. The TC1852 is also subjected to temperature and corrosion testing to help validate performance in harsh operating conditions.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 1999 | Dodge | Ram 1500 | RWD | Front Lower | — |
| 1998 | Dodge | Ram 1500 | RWD | Front Lower | — |
| 1997 | Dodge | Ram 1500 | RWD | Front Lower | — |
| 1996 | Dodge | Ram 1500 | RWD | Front Lower | — |
| 1995 | Dodge | Ram 1500 | RWD | Front Lower | — |
| 1994 | Dodge | Ram 1500 | RWD | Front Lower | — |
| No rows match your filter. | |||||