/live/media/DE/DE_TC1953_Ang.jpg)
Delphi TC1953 Suspension Stabilizer Bar Link - Front
| Brand | Delphi TC1953 |
|---|---|
| Position | Front |
| Bearing Material | Polyoxymethilen (POM) |
| Bolt Length | 10.039 |
| Bolt Length | 255.0 |
| Bolt Thread Diameter | 0.39 |
| Bolt Thread Diameter | 10.0 |
| Bolt Thread Size | M10 x 1.25 |
| Bolts Included | No |
| Bushing Color | Black |
| Bushing Material | Rubber |
| Bushings Included | No |
| Dust Boot Included | Yes |
| End 1 Type | Ball Joint |
| End 2 Type | Ball Joint |
| Grade Type | Regular |
| Greaseable | No |
| Height | 3.937 |
| Height | 100.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length | 10.039 |
| Length | 255.0 |
| Locking Nuts Included | Yes |
| Material | Steel |
| Washers Included | No |
| Weight | 0.73 |
| Width | 1.339 |
| Width | 34.0 |
| Fits | Nissan · 5 vehicles |
Standard replacement. OE expertise helps ensure compatibility with the aftermarket part.
Steel construction. Built with a steel housing and ball joints for dependable suspension linkage.
Dust boot included. Helps protect the joint from dirt and moisture.
Cross-references Beck/Arnley 101-7014, Dorman - Premium SL69125XL and MAS Industries SL69125 for the same application. See all 6.
Front Stabilizer Bar Link for Versa
Delphi TC1953 is a front suspension stabilizer bar link built for OE-style replacement on the 2007-2011 Nissan Versa. It uses steel construction, ball joint ends, and a dust boot to support consistent sway bar connection and steering response in everyday driving.
- Fits 2007-2011 Nissan Versa, front
- Delphi TC1953 front stabilizer bar link for OE replacement applications
- Steel housing and steel construction
- Ball joint ends on both sides for suspension articulation
- Dust boot included; locking nuts included
- Black bushing color with rubber bushing material
- Standard replacement grade for front suspension service
- Bolt thread size: M10 x 1.25
OE-Style Replacement Details
Delphi TC1953 is engineered using dimensional and material analysis to match OE fit and function as closely as possible. The part is tested for extreme temperature exposure and salt spray resistance, reflecting the brand’s focus on durability in harsh road conditions. For shoppers searching for a Nissan Versa front sway bar link, front stabilizer link, or Delphi TC1953 replacement, this part supports a direct-service repair on the front suspension.
This part cross-references Beck/Arnley 101-7014 and QuickSteer K750268 for the same application.
Common Problems It Can Address
- Clunking or rattling from the front suspension
- Loose or unstable handling over bumps and turns
- Excess play in the sway bar connection
- Worn ball joints in the stabilizer link
- Noise caused by a damaged dust boot or deteriorated bushing
Installation Notes
Install Delphi TC1953 on the front suspension of the 2007-2011 Nissan Versa and verify thread size, mounting points, and link length before tightening. Inspect the sway bar, strut, and adjacent hardware for wear during replacement, and confirm final torque with the vehicle at normal ride height when applicable.
Quality Assurance
Delphi applies OE-focused engineering and validation to its aftermarket steering and suspension portfolio. TC1953 is built to standard replacement specifications and is tested for temperature extremes and extended salt exposure to support dependable service life.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2011 | Nissan | Versa | Front | — |
| 2010 | Nissan | Versa | Front | — |
| 2009 | Nissan | Versa | Front | — |
| 2008 | Nissan | Versa | Front | — |
| 2007 | Nissan | Versa | Front | — |
| No rows match your filter. | ||||