/live/media/DE/DE_TC2153_Ang.jpg)
Delphi TC2153 Suspension Ball Joint - Front Lower
| Brand | Delphi TC2153 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 0 |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Distance Between Mounting Holes | 24.6 |
| Distance Between Mounting Holes | 55.1 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 3.307 |
| Height | 84.0 |
| Item Grade | Standard Replacement |
| Length | 98 |
| Material | Steel |
| Maximum Outside Diameter | 3.858 |
| Maximum Outside Diameter | 98.0 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter | 0.772 |
| Mounting Bolt Head Diameter | 19.6 |
| Mounting Bolt Length | 1.827 |
| Mounting Bolt Length | 46.4 |
| Mounting Bolt Thread Length | 1.142 |
| Mounting Bolt Thread Length | 29.0 |
| Mounting Bolt Thread Pitch | 1.25 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.598 |
| Stud Tapered End 1 Diameter | 15.2 |
| Stud Tapered End 2 Diameter | 0.425 |
| Stud Tapered End 2 Diameter | 10.8 |
| Stud Thread Length | 0.827 |
| Stud Thread Length | 21.0 |
| Stud Thread Pitch | 1.75 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Type | Premium |
| Washers Included | No |
| Width | 98.0 |
| Fits | Chevrolet · 3 vehicles |
Standard replacement. OE-style fit and function for straightforward installation.
Steel construction. Built with a dust boot and threaded tapered stud for dependable operation.
Bolt-on design. Includes mounting hardware, nuts, and cotter pin for easier service.
Cross-references Dorman - Premium BJ92105XL, B5331 and BJ92105 for the same application. See all 3.
Delphi TC2153 Front Lower Ball Joint
Delphi TC2153 is a premium suspension ball joint for the front lower position on select Chevrolet Captiva Sport models. Built as a standard replacement part, it combines a steel body, tapered stud, and protective dust boot for OE-style suspension service.
Fits 2008-2010 Chevrolet Captiva Sport, front lower. This Delphi TC2153 ball joint is engineered for direct replacement use where precise steering and suspension geometry matter.
Key Features
- Front lower suspension ball joint assembly
- Steel construction for strength and durability
- Dust boot included with chloroprene rubber material
- Ball joint assembly, castle nut, cotter pin, nuts, and mounting hardware included
- Bolt-on mounting design with three mounting holes
- Tapered stud design with threaded stud connection
- Standard replacement, non-adjustable, non-greaseable design
Detailed Description
Delphi TC2153 is built for the front lower suspension position on the 2008-2010 Chevrolet Captiva Sport. Delphi applies OE-focused dimensional and material analysis to help ensure proper part-to-vehicle compatibility, and the part is tested across extreme temperature ranges and salt-spray exposure to evaluate durability in demanding conditions. The sealed design uses a dust boot and does not require greasing, making it a straightforward replacement for worn front suspension joints. This part cross-references Dorman - Premium BJ92105XL for the same application.
Common Problems It Can Help Address
- Front-end clunking or popping over bumps
- Excessive play in the lower suspension joint
- Uneven tire wear caused by worn suspension geometry
- Loose or imprecise steering feel
- Inspection failure due to suspension joint wear
Installation Notes and Tips
Verify the front lower position and confirm vehicle application before installation on the Chevrolet Captiva Sport. Inspect the surrounding control arm, fasteners, and steering components for wear before replacing the ball joint. Because this is a bolt-on design, proper torque and alignment procedures are important after installation. Confirm stud taper and mounting-hole alignment during assembly to avoid fitment issues.
Quality Assurance
Delphi uses OE-oriented engineering, dimensional checks, and material analysis to support consistent aftermarket fitment. The part is also subjected to temperature and corrosion testing to evaluate performance in harsh service conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Chevrolet | Captiva Sport | Front Lower | — |
| 2009 | Chevrolet | Captiva Sport | Front Lower | — |
| 2008 | Chevrolet | Captiva Sport | Front Lower | — |
| No rows match your filter. | ||||