/live/media/DE/DE_TC2260_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC2260 Suspension Ball Joint - Front Lower
| Brand | Delphi TC2260 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 1 |
| Bushings Included | No |
| Castle Nut Included | No |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 1.732 |
| Height | 44.0 |
| Item Grade | Standard Replacement |
| Length | 63 |
| Material | Steel |
| Maximum Outside Diameter | 1.811 |
| Maximum Outside Diameter | 46.0 |
| Mount Plate Included | No |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 0 |
| Mounting Type | Pressed |
| Nuts Included | No |
| Suspension Grade Type | Standard |
| Tapered Stud | No |
| Type | Premium |
| Washers Included | No |
| Width | 58.0 |
| Fits | Mazda · 22 vehicles |
Standard replacement. OE expertise helps ensure compatibility with the original part.
Steel construction. Built with a dust boot for added protection and durability.
Pressed fit design. Ball joint assembly for a secure, service-ready installation.
Cross-references Beck/Arnley 102-5547, Dorman - OE Solutions 520-865 and Dorman - Premium BJ65215XL for the same application. See all 10.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TC2260 Front Lower Ball Joint
Delphi TC2260 is a premium suspension ball joint built for front lower applications on select Mazda 3 and Mazda 5 models. It combines OE-focused dimensional control with a pressed-in design and a protective dust boot for dependable steering and suspension service.
Key Features
- Front lower suspension ball joint for select Mazda applications
- Pressed mounting type for direct suspension service
- Steel construction with standard replacement grade
- Dust boot included with chloroprene rubber (CR) material
- Ball joint assembly included
- Non-greaseable design with no grease fitting
- OE-oriented dimensional and material analysis for fit consistency
- Tested for temperature extremes and salt spray exposure
Detailed Description
Delphi TC2260 is engineered as a standard replacement suspension ball joint for the front lower position. It is compatible with 2004-2013 Mazda 3, 2009-2013 Mazda 3 Sport, 2006-2008 Mazda 5, and 2012-2015 Mazda 5 front lower applications. The steel body, pressed mounting style, and included dust boot support a service-ready installation in the suspension system. Delphi applies OE-based dimensional and material analysis to help maintain proper part compatibility, and the component is validated through temperature and corrosion testing for demanding road conditions. This part cross-references MOOG Chassis Products K500209 for the same application.
Common Repair Uses
- Restores worn front suspension articulation on Mazda 3 and Mazda 5 models
- Addresses looseness or play in the front lower suspension
- Helps correct clunking or knocking from a worn ball joint
- Supports stable steering response and wheel control
- Replaces a damaged dust boot or deteriorated joint assembly
Installation Notes and Tips
Press-fit installation is required, so the original joint must be removed from the control arm or suspension carrier before the new part is installed. Inspect the surrounding control arm, bushings, and mounting surfaces for wear or damage before assembly. Because this is a non-greaseable design, routine lubrication is not required after installation. Verify front lower fitment against the vehicle’s model year before service on Mazda 3, Mazda 3 Sport, or Mazda 5 applications.
Quality Assurance
Delphi uses OE-focused engineering practices and validates steering and suspension parts through extreme temperature testing and extended salt spray exposure. The TC2260 is built to standard replacement expectations with attention to dimensional accuracy and material compatibility.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2015 | Mazda | 5 | Front Lower | — |
| 2014 | Mazda | 5 | Front Lower | — |
| 2013 | Mazda | 3 | Front Lower | — |
| 2013 | Mazda | 3 Sport | Front Lower | — |
| 2013 | Mazda | 5 | Front Lower | — |
| 2012 | Mazda | 3 | Front Lower | — |
| 2012 | Mazda | 3 Sport | Front Lower | — |
| 2012 | Mazda | 5 | Front Lower | — |
| 2011 | Mazda | 3 | Front Lower | — |
| 2011 | Mazda | 3 Sport | Front Lower | — |
| 2010 | Mazda | 3 | Front Lower | — |
| 2010 | Mazda | 3 Sport | Front Lower | — |
| 2009 | Mazda | 3 | Front Lower | — |
| 2009 | Mazda | 3 Sport | Front Lower | — |
| 2008 | Mazda | 3 | Front Lower | — |
| 2008 | Mazda | 5 | Front Lower | — |
| 2007 | Mazda | 3 | Front Lower | — |
| 2007 | Mazda | 5 | Front Lower | — |
| 2006 | Mazda | 3 | Front Lower | — |
| 2006 | Mazda | 5 | Front Lower | — |
| 2005 | Mazda | 3 | Front Lower | — |
| 2004 | Mazda | 3 | Front Lower | — |
| No rows match your filter. | ||||