/live/media/DE/DE_TC2318_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC2318 Suspension Ball Joint - Front Right Lower
| Brand | Delphi TC2318 |
|---|---|
| Position | Front Right Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Gray |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Distance Between Mounting Holes | 95.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 4.567 |
| Height | 116.0 |
| Item Grade | Standard Replacement |
| Length | 812 |
| Material | Steel |
| Maximum Outside Diameter | 2.354 |
| Maximum Outside Diameter | 59.8 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.634 |
| Stud Tapered End 1 Diameter | 16.1 |
| Stud Tapered End 2 Diameter | 0.748 |
| Stud Tapered End 2 Diameter | 19.0 |
| Stud Thread Diameter | 0.551 |
| Stud Thread Diameter | 14.0 |
| Stud Thread Length | 0.787 |
| Stud Thread Length | 20.0 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 73.0 |
| Fits | Lexus · 25 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Steel construction. Built with a chloroprene rubber dust boot for added protection.
Bolt-on installation. Includes mounting hardware, nuts, cotter pin, and castle nut.
Cross-references Beck/Arnley 101-4960, Dorman - Premium BJ64114XL and Mevotech Supreme MS86502 for the same application. See all 12.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Front Right Lower Ball Joint
Delphi TC2318 is a standard replacement suspension ball joint for select Lexus applications, including GS300, GS400, GS430, and SC430 models. Built with OE-focused dimensional and material analysis, it is designed for front right lower suspension service where precise fit and consistent steering response matter.
Key Features
- Steel construction with a gray finish
- Ball joint assembly included
- Dust boot included; chloroprene rubber (CR) boot material
- Castle nut, cotter pin, nuts, and mounting hardware included
- Threaded stud with tapered design for secure seating
- Bolt-on mounting type with 3 mounting holes
- Standard replacement, non-adjustable, non-greaseable design
- Position: front right lower
Detailed Product Overview
Delphi TC2318 is engineered for OE-level dimensional compatibility and is tested for demanding temperature and corrosion conditions, including exposure below -40 degrees C, above 120 degrees C, and extended salt spray testing. That makes it a practical choice for Lexus GS300 front right lower ball joint replacement, Lexus GS430 front right lower suspension repair, Lexus GS400 front right lower service, and Lexus SC430 front right lower ball joint replacement. This part cross-references MOOG Chassis Products K500101 for the same application.
Common Problems This Part Can Address
- Front suspension looseness or play at the lower control arm connection
- Clunking or knocking noises from the front right suspension
- Uneven tire wear caused by worn ball joint movement
- Steering wander or reduced front-end stability
- Inspection failure due to excessive joint wear or boot damage
Installation Notes and Tips
Verify front right lower fitment before installation on 1998-2005 Lexus GS300, 1998-2000 Lexus GS400, 2001-2005 Lexus GS430, and 2002-2010 Lexus SC430. Confirm stud taper, mounting-hole spacing, and thread specifications against the original part before assembly. Because this is a bolt-on suspension component, proper torque procedures and a post-installation alignment are recommended after replacement.
Quality Assurance
Delphi applies OE engineering methods to its aftermarket steering and suspension portfolio, with dimensional and material analysis used to support fit and function. TC2318 is built as a standard replacement ball joint for consistent service in Lexus GS300, GS400, GS430, and SC430 front right lower applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Lexus | SC430 | Front Right Lower | — |
| 2009 | Lexus | SC430 | Front Right Lower | — |
| 2008 | Lexus | SC430 | Front Right Lower | — |
| 2007 | Lexus | SC430 | Front Right Lower | — |
| 2006 | Lexus | SC430 | Front Right Lower | — |
| 2005 | Lexus | GS300 | Front Right Lower | — |
| 2005 | Lexus | GS430 | Front Right Lower | — |
| 2005 | Lexus | SC430 | Front Right Lower | — |
| 2004 | Lexus | GS300 | Front Right Lower | — |
| 2004 | Lexus | GS430 | Front Right Lower | — |
| 2004 | Lexus | SC430 | Front Right Lower | — |
| 2003 | Lexus | GS300 | Front Right Lower | — |
| 2003 | Lexus | GS430 | Front Right Lower | — |
| 2003 | Lexus | SC430 | Front Right Lower | — |
| 2002 | Lexus | GS300 | Front Right Lower | — |
| 2002 | Lexus | GS430 | Front Right Lower | — |
| 2002 | Lexus | SC430 | Front Right Lower | — |
| 2001 | Lexus | GS300 | Front Right Lower | — |
| 2001 | Lexus | GS430 | Front Right Lower | — |
| 2000 | Lexus | GS300 | Front Right Lower | — |
| 2000 | Lexus | GS400 | Front Right Lower | — |
| 1999 | Lexus | GS300 | Front Right Lower | — |
| 1999 | Lexus | GS400 | Front Right Lower | — |
| 1998 | Lexus | GS300 | Front Right Lower | — |
| 1998 | Lexus | GS400 | Front Right Lower | — |
| No rows match your filter. | ||||