/live/media/DE/DE_TC2405_Ang.jpg)
Delphi TC2405 Suspension Ball Joint - Front Lower
| Brand | Delphi TC2405 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 0 |
| Bushings Included | No |
| Castle Nut Included | No |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 1.89 |
| Height | 48.0 |
| Item Grade | Standard Replacement |
| Length | 88 |
| Material | Steel |
| Maximum Outside Diameter | 1.89 |
| Maximum Outside Diameter | 48.0 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Press In |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.803 |
| Stud Tapered End 1 Diameter | 20.4 |
| Stud Tapered End 2 Diameter | 0.596 |
| Stud Tapered End 2 Diameter | 15.15 |
| Stud Thread Length | 0.945 |
| Stud Thread Length | 24.0 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Type | Premium |
| Washers Included | No |
| Width | 56.0 |
| Fits | INFINITI and Nissan · 9 vehicles |
Standard replacement. OE-style fit and compatibility for straightforward service.
Steel construction. Built with a dust boot and press-in mounting for dependable operation.
OE expertise. Delphi applies dimensional and material analysis for precise aftermarket compatibility.
Cross-references Mevotech Supreme MK90459, MOOG Chassis Products K90459 and 101-4932 for the same application. See all 7.
Delphi TC2405 Front Lower Ball Joint
Delphi TC2405 is a premium front lower suspension ball joint built for OE-style replacement performance. It is engineered for the 2000-2003 Nissan Maxima, 2000-2001 INFINITI I30, and 2002-2004 INFINITI I35, with a press-in mounting design and a sealed dust boot for service-focused durability.
Key Features
- Front lower suspension ball joint assembly
- Press-in mounting type for OE-style service replacement
- Steel construction with a chloroprene rubber dust boot
- Sealed, non-greaseable design
- Includes mounting hardware and nuts
- Standard replacement grade for front suspension repair
- Threaded, tapered stud design
Detailed Description
Delphi TC2405 is built for front lower suspension service on the Nissan Maxima and INFINITI I30 and I35 applications listed above. Delphi applies OE-level dimensional and material analysis to help ensure proper fit and consistent replacement quality, and the part is tested across extreme temperature and corrosion conditions to verify durability in demanding environments. The sealed construction, dust boot, and press-in design make this a practical replacement for worn lower ball joints in the front suspension.
This part cross-references MOOG Chassis Products K90459 and Mevotech Supreme MK90459 for the same application. Delphi TC2405 is a direct-fit replacement choice for drivers servicing a 2000-2003 Nissan Maxima front lower ball joint or a 2002-2004 INFINITI I35 front lower ball joint.
What It Is Used For
- Restoring front suspension joint integrity
- Addressing looseness or play in the lower control arm area
- Reducing clunking or knocking from worn suspension joints
- Replacing a damaged or deteriorated sealed ball joint
- Supporting stable steering response and wheel control
Installation Notes and Tips
Delphi TC2405 uses a press-in mounting style, so proper suspension service tools are required for installation. Inspect the surrounding control arm, fasteners, and mating surfaces before assembly, and verify the tapered stud and thread pitch match the vehicle application. Because this is a sealed, non-greaseable ball joint, routine lubrication is not required after installation.
Quality Assurance
Delphi uses OE-focused engineering and validation methods for its steering and suspension parts. TC2405 is evaluated for temperature resistance and salt-spray exposure, along with dimensional and material checks, to support consistent aftermarket replacement quality.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | INFINITI | I35 | Front Lower | — |
| 2003 | INFINITI | I35 | Front Lower | — |
| 2003 | Nissan | Maxima | Front Lower | — |
| 2002 | INFINITI | I35 | Front Lower | — |
| 2002 | Nissan | Maxima | Front Lower | — |
| 2001 | INFINITI | I30 | Front Lower | — |
| 2001 | Nissan | Maxima | Front Lower | — |
| 2000 | INFINITI | I30 | Front Lower | — |
| 2000 | Nissan | Maxima | Front Lower | — |
| No rows match your filter. | ||||