/live/media/DE/DE_TC2686_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC2686 Suspension Ball Joint - Front Lower
| Brand | Delphi TC2686 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 0 |
| Castle Nut Included | No |
| Color | Black |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Distance Between Mounting Holes | 40.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 3.11 |
| Item Grade | Standard Replacement |
| Material | Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040 |
| Maximum Outside Diameter | 1.102 |
| Maximum Outside Diameter | 28.0 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter | 19.0 |
| Mounting Bolt Head Diameter | 25.6 |
| Mounting Bolt Length | 41.5 |
| Mounting Bolt Length | 44.5 |
| Mounting Bolt Shank Diameter | 12.0 |
| Mounting Bolt Shank Diameter | 13.7 |
| Mounting Bolt Thread Length | 27.0 |
| Mounting Bolt Thread Length | 30.0 |
| Mounting Bolt Thread Pitch | 1.25 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Mounting Type | Bolt In |
| Nuts Included | No |
| Stud Type | Grooved |
| Suspension Grade Type | Standard |
| Tapered Stud | No |
| Type | Premium |
| Washers Included | No |
| Width | 65.0 |
| Fits | Hyundai and Kia · 15 vehicles |
Standard replacement. OE expertise helps match the original part's fit and function.
Premium assembly. Ball joint assembly includes a dust boot and mounting hardware.
Bolt-in design. Built with alloy steel and carbon steel for dependable strength.
Cross-references Beck/Arnley 101-7176, MAS Industries BJ60305 and Mevotech Supreme MS90516 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Front Lower Ball Joint
Delphi TC2686 is a premium suspension ball joint for front lower applications on select Hyundai and Kia vehicles. Built with OE-focused materials and dimensional control, it supports precise suspension movement and consistent fitment for service replacement work.
- Front lower suspension ball joint assembly
- Fits 2010-2017 Hyundai Tucson, front lower
- Fits 2011-2014 Hyundai Sonata, front lower, for vehicles without MacPherson strut
- Fits 2011-2013 Kia Sportage, front lower
- Ball material: alloy steel SAE 5140; housing material: carbon steel SAE 1040
- Dust boot included with chloroprene rubber construction
- Bolt-in mounting design with mounting hardware included
- Standard replacement, non-adjustable, non-greaseable design
Built for OE-Level Fit
Delphi applies OE engineering standards to its aftermarket steering and suspension portfolio, and TC2686 reflects that approach with careful dimensional and material analysis for fit consistency. The grooved stud, bolt-in mounting style, and included dust boot help maintain secure installation and protection in everyday driving conditions. This Delphi TC2686 ball joint is a direct service option for front lower suspension repair on Hyundai Tucson, Hyundai Sonata, and Kia Sportage applications listed above.
This part cross-references MOOG Chassis Products K500239 for the same application.
Common Repair Symptoms
- Front-end clunking or popping over bumps
- Excessive play in the lower suspension joint
- Uneven tire wear related to worn suspension geometry
- Loose or imprecise steering feel
- Visible boot damage or joint contamination
Installation Notes
Verify vehicle configuration before ordering, especially for the 2011-2014 Hyundai Sonata, which is listed for vehicles without MacPherson strut. Confirm the front lower mounting pattern, bolt dimensions, and stud style against the original part before installation. After replacement, inspect alignment settings and suspension fasteners to restore proper handling and tire wear characteristics.
Quality Assurance
Delphi tests suspension components across extreme temperature ranges and extended salt-spray exposure to evaluate durability in harsh conditions. The brand also uses dimensional and material analysis to support OE-style compatibility between the original and replacement part.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2017 | Hyundai | Tucson | Front Lower | — |
| 2016 | Hyundai | Tucson | Front Lower | — |
| 2015 | Hyundai | Tucson | Front Lower | — |
| 2014 | Hyundai | Sonata | Front Lower | For vehicle without MacPherson strut |
| 2014 | Hyundai | Tucson | Front Lower | — |
| 2013 | Hyundai | Sonata | Front Lower | For vehicle without MacPherson strut |
| 2013 | Hyundai | Tucson | Front Lower | — |
| 2013 | Kia | Sportage | Front Lower | — |
| 2012 | Hyundai | Sonata | Front Lower | For vehicle without MacPherson strut |
| 2012 | Hyundai | Tucson | Front Lower | — |
| 2012 | Kia | Sportage | Front Lower | — |
| 2011 | Hyundai | Sonata | Front Lower | For vehicle without MacPherson strut |
| 2011 | Hyundai | Tucson | Front Lower | — |
| 2011 | Kia | Sportage | Front Lower | — |
| 2010 | Hyundai | Tucson | Front Lower | — |
| No rows match your filter. | ||||