/live/media/DE/DE_TC2905_Ang.jpg)
Delphi TC2905 Suspension Ball Joint - Front Lower
| Brand | Delphi TC2905 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Black |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Distance Between Mounting Holes | 88.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 4.287 |
| Height | 108.9 |
| Item Grade | Standard Replacement |
| Material | Steel |
| Maximum Outside Diameter | 2.047 |
| Maximum Outside Diameter | 52.0 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.622 |
| Stud Tapered End 1 Diameter | 15.8 |
| Stud Tapered End 2 Diameter | 0.709 |
| Stud Tapered End 2 Diameter | 18.0 |
| Stud Thread Diameter | 0.551 |
| Stud Thread Diameter | 14.0 |
| Stud Thread Length | 0.965 |
| Stud Thread Length | 24.5 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 75.1 |
| Fits | Mazda · 8 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Bolt-on installation. Mounting hardware, nuts, and cotter pin are included.
Steel construction. With a dust boot and black finish for added protection.
Cross-references Beck/Arnley 101-5767, Mevotech Supreme MK9923 and 537-035 for the same application. See all 7.
Delphi TC2905 Front Lower Ball Joint
Delphi TC2905 is a standard replacement suspension ball joint for the front lower position on select Mazda Millenia models. Built with a steel body, tapered threaded stud, and dust boot protection, it supports precise steering and suspension articulation in everyday driving.
Compatible With 1995-2002 Mazda Millenia, front lower. This Delphi ball joint is engineered using OE-focused dimensional and material analysis to help maintain proper fit and suspension geometry on the Mazda Millenia.
Key Features
- Steel construction with a black finish
- Front lower suspension ball joint assembly
- Bolt-on mounting type with 3 mounting holes
- Tapered threaded stud for secure connection
- Dust boot included; grease fitting not included
- Castle nut, cotter pin, nuts, and mounting hardware included
- Standard replacement, non-adjustable, non-greaseable design
Detailed Description
Delphi TC2905 is built for the front lower suspension position on 1995-2002 Mazda Millenia applications. The assembly uses a steel housing, chloroprene rubber dust boot, and a tapered stud with 1.5 thread pitch to support stable joint movement and consistent suspension response. Delphi validates steering and suspension components through extreme temperature exposure and salt-spray testing, then applies dimensional and material analysis to help match OE fit and function.
This part cross-references Beck/Arnley 101-5767 for the same application.
What It Helps Address
- Front-end looseness or play from a worn ball joint
- Clunking or knocking noises from the lower suspension area
- Uneven tire wear caused by suspension joint wear
- Steering wander or reduced directional stability
- Restoring proper suspension articulation on Mazda Millenia front lower applications
Installation Notes and Tips
Verify the front lower position and compare the stud taper, mounting pattern, and dimensions before installation. Inspect the control arm, fasteners, and surrounding suspension components for wear or damage, and replace any worn mating parts as needed. After installation, a professional wheel alignment is recommended to confirm correct suspension geometry.
Quality Assurance
Delphi applies OE-based engineering practices to its aftermarket steering and suspension portfolio. TC2905 is tested for temperature extremes and corrosion exposure to support dependable performance in real-world conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2002 | Mazda | Millenia | Front Lower | — |
| 2001 | Mazda | Millenia | Front Lower | — |
| 2000 | Mazda | Millenia | Front Lower | — |
| 1999 | Mazda | Millenia | Front Lower | — |
| 1998 | Mazda | Millenia | Front Lower | — |
| 1997 | Mazda | Millenia | Front Lower | — |
| 1996 | Mazda | Millenia | Front Lower | — |
| 1995 | Mazda | Millenia | Front Lower | — |
| No rows match your filter. | ||||