/live/media/DE/DE_TC2906_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC2906 Suspension Ball Joint - Front Lower
| Brand | Delphi TC2906 |
|---|---|
| Position | Front Lower |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Gray |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 3.63 |
| Height | 92.2 |
| Item Grade | Standard Replacement |
| Material | Steel |
| Maximum Outside Diameter | 1.886 |
| Maximum Outside Diameter | 47.9 |
| Mount Plate Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Pressed |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.661 |
| Stud Tapered End 1 Diameter | 16.8 |
| Stud Tapered End 2 Diameter | 0.791 |
| Stud Tapered End 2 Diameter | 20.1 |
| Stud Thread Diameter | 0.551 |
| Stud Thread Diameter | 14.0 |
| Stud Thread Length | 0.886 |
| Stud Thread Length | 22.5 |
| Stud Thread Pitch | 2.0 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 47.9 |
| Fits | Chrysler, Dodge, and Mitsubishi · 21 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Steel construction. Built with a dust boot and threaded tapered stud for dependable operation.
Pressed mounting. Includes mounting hardware, castle nut, cotter pin, and nuts.
Cross-references Beck/Arnley 102-7019, Mevotech Supreme MK7449 and MOOG Chassis Products K7449 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Front Lower Ball Joint
Delphi TC2906 is a standard replacement suspension ball joint for front lower applications on select Chrysler, Dodge, and Mitsubishi vehicles. It is built with OE-focused dimensional and material analysis to support proper fit and consistent steering and suspension performance.
Fits 2001-2005 Chrysler Sebring, front lower. Fits 2001-2005 Dodge Stratus, front lower. Fits 2000-2005 Mitsubishi Eclipse, front lower. Fits 1999-2003 Mitsubishi Galant, front lower.
Key Features
- Steel construction with a gray finish
- Pressed mounting type for front lower suspension use
- Ball joint assembly with dust boot included
- Threaded, tapered stud with castle nut, cotter pin, nuts, and mounting hardware included
- Standard replacement grade for OE-style service
- Grease-free, non-adjustable design
- Chloroprene rubber dust boot for joint protection
Detailed Description
Delphi TC2906 is engineered as a front lower suspension ball joint for vehicles that require a pressed-in OE-style replacement. The steel body, tapered threaded stud, and included dust boot support secure installation and reliable articulation at the suspension pivot point. Delphi applies OE-level dimensional and material analysis to help maintain proper compatibility with the original suspension geometry. This part cross-references MOOG Chassis Products K7449 and Mevotech Supreme MK7449 for the same application.
Use Delphi TC2906 when servicing worn front lower ball joints on the Chrysler Sebring, Dodge Stratus, Mitsubishi Eclipse, or Mitsubishi Galant within the listed model years. The part number TC2906 is a direct reference for buyers searching for a front lower suspension ball joint replacement with OE-style construction.
What It Helps Fix
- Front-end clunking or popping from a worn lower ball joint
- Excessive steering play or looseness
- Uneven tire wear caused by suspension joint wear
- Suspension noise over bumps or during turning
- Loose or unstable front suspension feel
Installation Notes
Pressed-in installation requires proper suspension service tools and attention to alignment after replacement. Inspect the surrounding control arm, fasteners, and steering components before installation. Verify the tapered stud, cotter pin hole, and castle nut engagement during assembly. Confirm fitment by year, make, model, and front lower position before ordering TC2906.
Quality Assurance
Delphi tests steering and suspension components across extreme temperature and corrosion conditions, including sub-zero and high-heat exposure plus extended salt-spray testing. That OE-focused validation supports consistent performance for front lower service on the listed Chrysler, Dodge, and Mitsubishi applications.
| Year | Make | Model | Body Type | # Doors | Position | Notes |
|---|---|---|---|---|---|---|
| 2005 | Chrysler | Sebring | Coupe | 2 Door | Front Lower | — |
| 2005 | Dodge | Stratus | Coupe | 2 Door | Front Lower | — |
| 2005 | Mitsubishi | Eclipse | — | — | Front Lower | — |
| 2004 | Chrysler | Sebring | Coupe | 2 Door | Front Lower | — |
| 2004 | Dodge | Stratus | Coupe | 2 Door | Front Lower | — |
| 2004 | Mitsubishi | Eclipse | — | — | Front Lower | — |
| 2003 | Chrysler | Sebring | Coupe | 2 Door | Front Lower | — |
| 2003 | Dodge | Stratus | Coupe | 2 Door | Front Lower | — |
| 2003 | Mitsubishi | Eclipse | — | — | Front Lower | — |
| 2003 | Mitsubishi | Galant | — | — | Front Lower | — |
| 2002 | Chrysler | Sebring | Coupe | 2 Door | Front Lower | — |
| 2002 | Dodge | Stratus | Coupe | 2 Door | Front Lower | — |
| 2002 | Mitsubishi | Eclipse | — | — | Front Lower | — |
| 2002 | Mitsubishi | Galant | — | — | Front Lower | — |
| 2001 | Chrysler | Sebring | Coupe | 2 Door | Front Lower | — |
| 2001 | Dodge | Stratus | Coupe | 2 Door | Front Lower | — |
| 2001 | Mitsubishi | Eclipse | — | — | Front Lower | — |
| 2001 | Mitsubishi | Galant | — | — | Front Lower | — |
| 2000 | Mitsubishi | Eclipse | — | — | Front Lower | — |
| 2000 | Mitsubishi | Galant | — | — | Front Lower | — |
| 1999 | Mitsubishi | Galant | — | — | Front Lower | — |
| No rows match your filter. | ||||||