/live/media/DE/DE_TC3402_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC3402 Suspension Ball Joint - Front Left
| Brand | Delphi TC3402 |
|---|---|
| Position | Front Left |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 0 |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Distance Between Mounting Holes | 45.7 |
| Distance Between Mounting Holes | 59.9 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 3.543 |
| Height | 90.0 |
| Item Grade | Standard Replacement |
| Length | 105 |
| Material | Steel |
| Maximum Outside Diameter | 3.622 |
| Maximum Outside Diameter | 92.0 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter | 0.709 |
| Mounting Bolt Head Diameter | 18.0 |
| Mounting Bolt Length | 1.378 |
| Mounting Bolt Length | 35.0 |
| Mounting Bolt Shank Diameter | 0.472 |
| Mounting Bolt Shank Diameter | 12.0 |
| Mounting Bolt Thread Length | 0.906 |
| Mounting Bolt Thread Length | 23.0 |
| Mounting Bolt Thread Pitch | 1.25 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.827 |
| Stud Tapered End 1 Diameter | 21.0 |
| Stud Tapered End 2 Diameter | 0.689 |
| Stud Tapered End 2 Diameter | 17.5 |
| Stud Thread Length | 0.748 |
| Stud Thread Length | 19.0 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Type | Premium |
| Washers Included | Yes |
| Width | 92.0 |
| Fits | Acura and Honda · 12 vehicles |
Standard replacement. OE expertise helps match the original part’s fit and function.
Bolt-on installation. Includes mounting hardware for a straightforward replacement.
Steel construction. Built with a dust boot and threaded tapered stud for dependable operation.
Cross-references Beck/Arnley 101-8167, Dorman - OE Solutions 524-141 and MOOG Chassis Products K500070 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Front Left Suspension Ball Joint for Civic and CSX
Delphi TC3402 is a premium front left suspension ball joint built for OE-style replacement on select Acura CSX and Honda Civic applications. It combines a steel body, tapered stud, and included dust boot to support precise steering and suspension movement in everyday driving.
Fits 2006-2011 Acura CSX, front left. Fits 2006-2011 Honda Civic, front left. Delphi TC3402 is engineered for direct bolt-on service with application-specific dimensions and mounting points.
- Steel construction for durable suspension service
- Ball joint assembly included for direct replacement
- Dust boot included with chloroprene rubber material
- Castle nut, cotter pin, nuts, washers, and mounting hardware included
- Bolt-on mounting type with 3 mounting holes
- Non-greaseable, sealed design
- Tapered stud with threaded stud design
- Standard replacement grade for front left position
Detailed Product Overview
Delphi TC3402 is a front left suspension ball joint designed for vehicles that need accurate steering response and stable suspension articulation. Delphi applies OE-level dimensional and material analysis to help match the original fit and function, and the part is tested across extreme temperature ranges and salt-spray exposure to verify durability in demanding conditions. This part cross-references MOOG Chassis Products K500070 for the same application.
Common Problems This Part Can Address
- Front-end looseness or play at the suspension pivot point
- Clunking or knocking from the front left suspension
- Uneven tire wear caused by worn ball joint movement
- Steering wander or reduced directional stability
- Excessive suspension noise over bumps and turns
Installation Notes and Tips
Verify front left fitment by year, make, and model before installation. Inspect the control arm, knuckle, and surrounding hardware for wear or damage, and confirm the tapered stud seats correctly during assembly. Because this is a bolt-on design with included mounting hardware, installation is straightforward when the mating surfaces are clean and the fasteners are torqued to the vehicle manufacturer’s specifications.
Quality Assurance
Delphi builds steering and suspension components using OE-focused engineering and validation methods. TC3402 is tested for temperature extremes and corrosion resistance to support consistent performance in service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2011 | Acura | CSX | Front Left | — |
| 2011 | Honda | Civic | Front Left | — |
| 2010 | Acura | CSX | Front Left | — |
| 2010 | Honda | Civic | Front Left | — |
| 2009 | Acura | CSX | Front Left | — |
| 2009 | Honda | Civic | Front Left | — |
| 2008 | Acura | CSX | Front Left | — |
| 2008 | Honda | Civic | Front Left | — |
| 2007 | Acura | CSX | Front Left | — |
| 2007 | Honda | Civic | Front Left | — |
| 2006 | Acura | CSX | Front Left | — |
| 2006 | Honda | Civic | Front Left | — |
| No rows match your filter. | ||||