/live/media/DE/DE_TC3403_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC3403 Suspension Ball Joint - Front Right
| Brand | Delphi TC3403 |
|---|---|
| Position | Front Right |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushing Quantity | 0 |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Distance Between Mounting Holes | 45.7 |
| Distance Between Mounting Holes | 59.9 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 3.543 |
| Height | 90.0 |
| Item Grade | Standard Replacement |
| Length | 105 |
| Material | Steel |
| Maximum Outside Diameter | 3.622 |
| Maximum Outside Diameter | 92.0 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter | 0.862 |
| Mounting Bolt Head Diameter | 21.9 |
| Mounting Bolt Length | 1.476 |
| Mounting Bolt Length | 37.5 |
| Mounting Bolt Shank Diameter | 0.472 |
| Mounting Bolt Shank Diameter | 12.0 |
| Mounting Bolt Thread Length | 1.181 |
| Mounting Bolt Thread Length | 30.0 |
| Mounting Bolt Thread Pitch | 1.25 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.827 |
| Stud Tapered End 1 Diameter | 21.0 |
| Stud Tapered End 2 Diameter | 0.689 |
| Stud Tapered End 2 Diameter | 17.5 |
| Stud Thread Length | 0.748 |
| Stud Thread Length | 19.0 |
| Stud Thread Pitch | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Type | Premium |
| Washers Included | Yes |
| Width | 92.0 |
| Fits | Acura and Honda · 12 vehicles |
Standard replacement. Bolt-on ball joint with mounting hardware included for easier installation.
Steel construction. Built with a dust boot and threaded tapered stud for dependable operation.
OE expertise. Delphi applies dimensional and material analysis for compatibility.
Cross-references Beck/Arnley 101-8168, Dorman - OE Solutions 524-142 and MOOG Chassis Products K500069 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Front Right Suspension Ball Joint
Delphi TC3403 is a premium front right suspension ball joint for select Honda Civic and Acura CSX applications. Built as a standard replacement part, it uses a bolt-on design with a threaded tapered stud, dust boot, and included mounting hardware for a direct service replacement.
Delphi applies OE-focused engineering to its aftermarket steering and suspension portfolio, with dimensional and material analysis used to support fit and function. This part is built from steel and is intended for front right service on 2006-2011 Honda Civic and 2006-2011 Acura CSX models.
Key Features
- Delphi TC3403 suspension ball joint for front right applications
- Fits 2006-2011 Honda Civic, front right
- Fits 2006-2011 Acura CSX, front right
- Steel construction with a premium, standard replacement design
- Bolt-on mounting type with 3 mounting holes
- Dust boot included with chloroprene rubber construction
- Castle nut, cotter pin, nuts, washers, and mounting bolts included
- Non-greaseable, sealed-style design with no grease fitting
- Tapered stud with cotter pin hole for secure installation
Detailed Description
Delphi TC3403 is engineered for front right suspension service where a worn ball joint can affect steering response, tire wear, and front-end stability. It cross-references Beck/Arnley 101-8168, Dorman - OE Solutions 524-142, and MOOG Chassis Products K500069 for the same application. The part number TC3403 is a direct reference for shoppers looking for a front right ball joint for Honda Civic and Acura CSX fitment.
Delphi tests steering and suspension components across extreme temperature and corrosion conditions, including sub-zero cold, high heat, and extended salt-spray exposure. That OE-focused validation, along with dimensional and material analysis, helps support proper fitment and consistent service performance on 2006-2011 Honda Civic and 2006-2011 Acura CSX vehicles.
Common Repair Symptoms
- Front-end clunking or popping over bumps
- Loose or imprecise steering feel
- Uneven or accelerated front tire wear
- Excessive suspension play at the wheel end
- Inspection failure due to worn ball joint movement
Installation Notes
Verify front right position, stud taper, and mounting-hole spacing before installation. Inspect the control arm, knuckle, and surrounding hardware for wear or damage, and replace any compromised fasteners or related suspension parts as needed. Because this is a non-greaseable ball joint, routine lubrication is not required after installation.
Quality Assurance
Delphi uses OE-based engineering and durability testing for its aftermarket steering and suspension parts. TC3403 is built to meet the demands of daily driving and service replacement on the listed Honda Civic and Acura CSX applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2011 | Acura | CSX | Front Right | — |
| 2011 | Honda | Civic | Front Right | — |
| 2010 | Acura | CSX | Front Right | — |
| 2010 | Honda | Civic | Front Right | — |
| 2009 | Acura | CSX | Front Right | — |
| 2009 | Honda | Civic | Front Right | — |
| 2008 | Acura | CSX | Front Right | — |
| 2008 | Honda | Civic | Front Right | — |
| 2007 | Acura | CSX | Front Right | — |
| 2007 | Honda | Civic | Front Right | — |
| 2006 | Acura | CSX | Front Right | — |
| 2006 | Honda | Civic | Front Right | — |
| No rows match your filter. | ||||