/live/media/DE/DE_TC3671_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TC3671 Suspension Ball Joint - Front Left
| Brand | Delphi TC3671 |
|---|---|
| Position | Front Left |
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | No |
| Color | Gray |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 4.244 |
| Height | 107.8 |
| Item Grade | Standard Replacement |
| Material | Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040 |
| Mount Plate Included | No |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 0 |
| Mounting Type | Pressed |
| Nuts Included | Yes |
| Stud Tapered End 1 Diameter | 0.681 |
| Stud Tapered End 1 Diameter | 17.3 |
| Stud Tapered End 2 Diameter | 0.996 |
| Stud Tapered End 2 Diameter | 25.3 |
| Stud Thread Diameter | 14.0 |
| Stud Thread Length | 0.669 |
| Stud Thread Length | 17.0 |
| Stud Thread Pitch | 1.5 |
| Tapered Stud | Yes |
| Washers Included | No |
| Width | 49.6 |
| Fits | Ford · 4 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Pressed mounting. Includes hardware for a straightforward installation.
Dust boot included. Helps protect the ball joint assembly from contamination.
Cross-references Dorman - OE Solutions 523-623, MOOG Chassis Products RK622136 and CB85463 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Front Left Ball Joint for Ford Escape
Delphi TC3671 is a front left suspension ball joint built for OE-style replacement on select Ford Escape models. It combines a pressed-in mounting design with a dust boot, tapered stud, and included mounting hardware to support precise steering and suspension movement.
Compatible with 2013-2014 Ford Escape, front left, and 2018-2019 Ford Escape, front left.
Key Features
- Delphi suspension ball joint, part number TC3671
- Front left position for select Ford Escape applications
- Pressed mounting type for direct suspension service
- Ball material: alloy steel SAE 5140; housing material: carbon steel SAE 1040
- Dust boot included with chloroprene rubber construction
- Tapered stud with 14.0 mm thread diameter and 1.5 pitch
- Mounting hardware, bolts, and nuts included
- Standard replacement item grade
Detailed Description
Delphi TC3671 is engineered as a suspension ball joint for the front left side of the Ford Escape. Delphi applies OE-focused dimensional and material analysis to help ensure proper part-to-part compatibility, while its testing process includes exposure to extreme temperatures and extended salt spray conditions. The result is a replacement ball joint built around OE-style fit and material selection for service on 2013-2014 Ford Escape and 2018-2019 Ford Escape models. This part cross-references MOOG Chassis Products RK622136 for the same application.
Common Repair Symptoms
- Front-end clunking or popping over bumps
- Excessive play in the steering or suspension
- Uneven tire wear caused by worn ball joint movement
- Loose or unstable handling at the front left corner
- Inspection failure due to suspension joint wear
Installation Notes and Tips
Use this pressed ball joint only on the listed Ford Escape applications and verify front left placement before installation. Inspect the control arm, knuckle, and surrounding suspension components for wear before pressing in the new joint. Because the design is non-greaseable and does not include a grease fitting, routine lubrication is not part of service. Confirm stud taper, thread size, and mounting dimensions against the original part during replacement.
Quality Assurance
Delphi subjects its OE and aftermarket steering components to temperature extremes and salt-spray exposure testing, along with dimensional and material analysis, to support consistent replacement quality for the TC3671.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2019 | Ford | Escape | Front Left | — |
| 2018 | Ford | Escape | Front Left | — |
| 2014 | Ford | Escape | Front Left | — |
| 2013 | Ford | Escape | Front Left | — |
| No rows match your filter. | ||||